EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CERN - ACCELERATORS AND TECHNOLOGY SECTOR Silica–silica Polyimide Buffered Optical Fibre Irradiation and Strength Experiment at Cryogenic Temperatures for 355 nm Pulsed Lasers

نویسندگان

  • E. Takala
  • K. F. Klein
  • B. Bordini
  • L. Bottura
  • J. Bremer
  • L. Rossi
چکیده

A controlled UV-light delivery system is envisioned to be built in order to study the stability properties of superconducting strands. The application requires a wave guide from room temperature to cryogenic temperatures. Hydrogen loaded and unloaded polyimide buffered silica–silica 100 lm core fibres were tested at cryogenic temperatures. A thermal stress test was done at 1.9 K and at 4.2 K which shows that the minimal mechanical bending radius for the fibre can be 10 mm for testing (transmission was not measured). The cryogenic transmission loss was measured for one fibre to assess the magnitude of the transmission decrease due to microbending that takes place during cooldown. UV-irradiation degradation measurements were done for bent fibres at 4.2 K with a deuterium lamp and 355 nm pulsed lasers. The irradiation tests show that the fibres have transmission degradation only for wavelengths smaller than 330 nm due to the two photon absorption. The test demonstrates that the fibres are suitable for the cryogenic UV applications with 355 nm and 70 lJ pulsed lasers. 2011 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CERN - ACCELERATORS AND TECHNOLOGY SECTOR Secondary Electron Yield on Cryogenic Surfaces as a Function of Physisorbed Gases

Electron cloud is a serious limitation for the operation of particle accelerators with intense positively charged beams. It occurs if the secondary electron yield (SEY) of the beam-pipe surface is sufficiently high to induce an electron multiplication. At low surface temperatures, the SEY is strongly influenced by the nature of the physisorbed gases and by the corresponding surface coverage. Th...

متن کامل

European Organization for Nuclear Research Cern – Accelerators and Technology Sector

We review some accelerator physics topics for circular as well as linear colliders, considering both lepton and hadron beams. Invited Contribution to Review of Accelerator Science & Technology, Vol. 7 (2014), Editors Alexander W. Chao and Weiren Chou, World Scientific Pub., Singapore The research leading to these results has received partial funding from the European Commission under the FP7 Re...

متن کامل

EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CERN - ACCELERATORS AND TECHNOLOGY SECTOR First Operational Experience and Performance Optimization of the ATLAS Magnet Cryogenic System

The ATLAS magnet system, comprising a superconducting central solenoid and three superconducting toroids, has been successfully ramped up for the first time to the nominal operational current of 20.4 kA on 4 th August 2008. Since then, new cryogenic operational challenges have been raised, like the smoothing of steady-state parameters, the enhancing of transient procedures to minimize thermal s...

متن کامل

Medical Applications at CERN and the ENLIGHT Network

State-of-the-art techniques derived from particle accelerators, detectors, and physics computing are routinely used in clinical practice and medical research centers: from imaging technologies to dedicated accelerators for cancer therapy and nuclear medicine, simulations, and data analytics. Principles of particle physics themselves are the foundation of a cutting edge radiotherapy technique fo...

متن کامل

EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CERN - ACCELERATORS AND TECHNOLOGY SECTOR Impact of Modularity and Redundancy in Optimising the Reliability of Power Systems that Include a Large Number of Power Converters

CERN is working on a new particle accelerators that will require a very large number of power converters. In that view, the reliability of the whole powering will be a major issue. The use of a redundancy and modularity may help increasing the overall machine availability. However, the reliability of the redundancy system must be high enough to add a significant improvement when compared to sim...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012