Surface Wear Characterization Of Thermally Sprayed Coating Of Al2O3-13TiO2 on M.S Substrate
نویسندگان
چکیده
Wear of the surface is the major problem of all materials. This wear can be of many types and there can be several methods of reducing wear. Coating on the surface of material is one of them. On M.S substrate, thermal spray coating is done using Detonation spray gun and coating powders used is a mixture of oxides (Al2O3-13TiO2). The thermal-sprayed coatings are characterized by SEM, EDS analyses. Wear tests are carried on both coated and un-coated material on a pin-ondisc wear test rig and results are evaluated that Al2O3-13TiO2 coating is having less wear as compared to substrate material.
منابع مشابه
Tribological Investigation of Detonation Sprayed Ni - Cr And Al 2 O 3 13 Tio 2 Coatings On Grey Cast Iron To Enhance Its Wear Resistance
This paper is concerned with the investigation of the capability of Detonation sprayed Ni-Cr And Al2O3 13TiO2 coatings to improve the tribological and mechanical properties of grey cast iron. The present study describes and compares the mechanical and tribological properties of NiCr and Al2O3 13TiO2 D-Sprayed coatings deposited on two different substrates (GI250 and GIHC) Experiments using a tr...
متن کاملFabrication of functionally graded Ni-Al2O3 nanocomposite coating and evaluation of its properties
In this study, functionally graded Ni-Al2O3 composite coating (FGN-A) has been produced from nickel Watt’s bath containing different concentrations of Al2O3 particles. For this, different composite coatings were electroplated in the same bath with different particles concentration to find the optimum concentration of particles in which the maximum content with uniform distribution of Al2O3 part...
متن کاملEffect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating
In this study, the effect of surface roughness and roughness morphology on the bond strength of WC-Co-Cr coatings has investigated. The three different surfaces morphology are use for this purpose. The first and tow samples sandblasted with alumina and silicon carbide respectively. Other sample no sandblasted before spraying process. The same WC-10Co-4Cr coating deposited on the substrates with...
متن کاملWear studies on plasma-sprayed Al2O3 and 8mole% of Yttrium-stabilized ZrO2 composite coating on biomedical Ti-6Al-4V alloy for orthopedic joint application
This paper presents the wear characteristics of the composite ceramic coating made with Al2O3-40wt%8YSZ on the biomedical grade Ti-6Al-4V alloy (grade 5) used for total joint prosthetic components, with the aim of improving their tribological behavior. The coatings were deposited using a plasma spraying technique, and optimization of plasma parameters was performed using response surface method...
متن کاملOn the fabrication and characterization of Al5083/Al2O3 surface nanocomposite via friction stir processing
In the present study, Al5083- Al2O3 nanocomposite was successfully prepared by friction stir processing (FSP) with rotational speed of 710 rpm and travel speed of 14 mm/min. In order to improve distribution of Al2O3 particles, a net of holes were designed on the surface of Al5083 sheet. The samples were characterized by optical and scanning electron microscopy (SEM), microhardness, tensile and ...
متن کامل