Drying induced upright sliding and reorganization of carbon nanotube arrays.
نویسندگان
چکیده
Driven by capillary force, wet carbon nanotube (CNT) arrays have been found to reorganize into cellular structures upon drying. During the reorganization process, individual CNTs are firmly attached to the substrate and have to lie down on the substrate at cell bottoms, forming closed cells. Here we demonstrate that by modifying catalyst structures, the adhesion of CNTs to the substrate can be weakened. Upon drying such CNT arrays, CNTs may slide away from their original sites on the surface and self-assemble into cellular patterns with bottoms open. It is also found that the sliding distance of CNTs increases with array height, and drying millimetre tall arrays leads to the sliding of CNTs over a few hundred micrometres and the eventual self-assembly into discrete islands. By introducing regular vacancies in CNT arrays, CNTs may be manipulated into different patterns.
منابع مشابه
Biomimetic polyimide nanotube arrays with slippery or sticky superhydrophobicity.
In this paper, we report the fabrication of superhydrophobic polyimide (PI) nanotube arrays with different topographies, which possess slippery or "sticky" superhydrophobicity. The PI nanotube arrays were fabricated by the porous alumina membrane molding method. We regulated three kinds of solvent evaporation and drying processes, which controlled different congregated and noncongregated topogr...
متن کاملSeparation of Salmonella Typhimurium Bacteria from Water Using MWCNTs Arrays
In this study, Salmonella Typhimurium bacteria removal from polluted water has been investigated using multiwall carbon nanotubes arrays. Experimental results reveal that the contact time, the bacterial concentration and the weight of multiwall carbon nanotubes arrays have positive significant effects on the bacteria removal efficiency. Increasing the contact time and the weight of multiwall ca...
متن کاملDistribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers
In this study, the distribution of residual stress in fiber-reinforced nanocomposites is investigated. Fiber-reinforced nanocomposite is composed of three substances: carbon fiber, carbon nanotube (CNT), and polymer matrix. Unit cells in hexagonal packing array with different arrays as unit cell, 3*3 and 5*5 arrays have been selected as suitable for finite element analysis of residual stresses....
متن کاملAdhesion, friction and wear on the nanoscale of MWNT tips and SWNT and MWNT arrays.
The nanotribological characterization of carbon nanotubes is fundamental for the exploration of new sliding applications. In this study, a comprehensive investigation of adhesion, friction and wear of a multiwalled nanotube (MWNT) tip, and SWNT (single-walled nanotube) and MWNT arrays has been carried out. A nonlinear response of the MWNT tip is observed when the tip is brought into and out of ...
متن کاملSurface properties of vertically aligned carbon nanotube arrays
This study focuses on the structural changes of vertically aligned carbon nanotube (CNT) arrays while measuring their adhesive properties and wetting behaviour. CNT forests grown by chemical vapor deposition with a height of ~100 μm, an outer CNT diameter of ~10 nm and a density of the order of ~10 CNTs/cm show an average adhesion of 4 N/cm when pressed against a glass surface. The applied forc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Nanotechnology
دوره 17 18 شماره
صفحات -
تاریخ انتشار 2006