Enhanced light-conversion efficiency of titanium- dioxide dye-sensitized solar cells with the addition of indium-tin-oxide and fluorine-tin-oxide nanoparticles in electrode films

نویسندگان

  • Tammy P. Chou
  • Qifeng Zhang
  • Bryan Russo
  • Guozhong Cao
چکیده

We prepared of electrodes that consist of TiO2 with addition of tin-doped indium oxide (ITO) or fluorine-doped tin oxide (FTO) nanoparticles and the application of such electrodes on dye-sensitized solar cell. As compared to TiO2 alone, the addition of ITO and FTO nanoparticles resulted in an efficiency improvement of ~ 20% up to ~ 54% for the TiO2ITO and TiO2-FTO systems, respectively. This improvement was partly attributed to a slightly enhanced dye-adsorption behavior and a change in the TiO2 surface chemistry due to the presence of ITO or FTO nanoparticles.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optical Studies and Photovoltaic Performance of Nanocrystalline Titanium Dioxide Sensitized with Local Dye

Nanocrystalline titanium (iv) oxide paste has been deposited on Fluorine doped tin oxide glass substrate by the blade method. The deposited film was subjected to thermal treatment to obtain an electrode foe a photo-electrochemical cell. The electrode was sensitized with prophyrin dye which was a local dye extracted from carica papaya leaves. Avaspec 2.1 spectrophotometer was used to obtain the ...

متن کامل

Semitransparent inverted polymer solar cells employing a sol-gel-derived TiO2 electron-selective layer on FTO and MoO3/Ag/MoO3 transparent electrode

We report a new semitransparent inverted polymer solar cell (PSC) with a structure of glass/FTO/nc-TiO2/P3HT:PCBM/MoO3/Ag/MoO3. Because high-temperature annealing which decreased the conductivity of indium tin oxide (ITO) must be handled in the process of preparation of nanocrystalline titanium oxide (nc-TiO2), we replace glass/ITO with a glass/fluorine-doped tin oxide (FTO) substrate to improv...

متن کامل

Fabrication of Polymeric Antireflection Film Manufactured by Anodic Aluminum Oxide Template on the Dye-Sensitized Solar Cell

In this study, a high energy conversion efficient dye-sensitized solar cells (DSSC) was successfully fabricated by attaching a double anti-reflection (AR) layer which is composed of a subwavelength moth-eye structured polymethyl methacrylate (PMMA) film and a polydimethylsiloxane (PDMS) film. The efficiency is up to 6.79%. The moth-eye structured PMMA film was fabricated by using anodic aluminu...

متن کامل

Ag nanoparticle-deposited TiO2 nanotube arrays for electrodes of Dye-sensitized solar cells

ABSTRACT Dye-sensitized solar cells composed of a photoanode of Ag nanoparticle (NP)-deposited TiO2 nanotube (TNT) arrays were fabricated. The TNT arrays were prepared by anodizing Ti films on fluorine-doped tin oxide (FTO)-coated glass substrates. Efficient charge transportation through the ordered nanostructure of TNT arrays should be carried out compared to conventional particulate TiO2 elec...

متن کامل

ENHANCED POWER CONVERSION EFFICIENCY OF DYE SYNTHESIZED SOLAR CELL BY FEW LAYERED GRAPHENE/CuO NANOCOMPOSITE AS A WORKING ELECTRODE

In this current research, we described an enhanced power conversion efficiency of dye sensitized solar cell (DSSC) and fabricated through Few Layered Graphene (FLG)/CuO nanocomposite synthesized by ultrasonic assisted synthesis (UAS) by varying of FLG (1, 2 and 3 wt%) ratio. The FLG/CuOnanocomposites characteristic features understood through various microscopic techniques such as FE-SEM and HR...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008