Computational analysis of actively-cooled 3D woven microvascular composites using a stabilized interface-enriched generalized finite element method
نویسندگان
چکیده
0017-9310/$ see front matter 2013 Elsevier Ltd. All rights reserved. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2013.05.054 ⇑ Corresponding author. Tel.: +1 217 244 7648; fax: +1 217 244 0720. E-mail address: [email protected] (P.H. Geubelle). 1 Current address: Department of Mechanical and Aerospace Engineering, Ohio State University, Scott Laboratory, 201 West 19th Avenue, Columbus, OH 43210, USA. Soheil Soghrati , Ahmad R. Najafi, Jie H. Lin, Kevin M. Hughes, Scott R. White, Nancy R. Sottos, Philippe H. Geubelle ⇑
منابع مشابه
A 3D interface-enriched generalized finite element method for weakly discontinuous problems with complex internal geometries
An interface-enriched generalized finite element method (GFEM) is introduced for 3D problems with discontinuous gradient fields. The proposed method differs from conventional GFEM by assigning the generalized degrees of freedom to the interface nodes, i.e., nodes generated along the interface when creating integration subdomains, instead of the nodes of the original mesh. A linear combination o...
متن کاملComputational modeling and design of actively-cooled microvascular materials
The computational modeling and design of an actively-cooled microvascular fin specimen is presented. The design study is based on three objective functions: (i) minimizing the maximum temperature in the thermally loaded fin, (ii) optimizing the flow efficiency of the embedded microchannel, and (iii) minimizing the void volume fraction of the microvascular material. A recently introduced Interfa...
متن کاملMeso-scale Modeling of Tension Analysis of Pure and Intra-ply Hybrid Woven Composites Using Finite Element Method
One of the key issues associated with using of composites in various applications is their tensile behavior. The tensile behavior of a composite material is strongly influenced by the properties of its constituents and their distribution. This paper focuses on gaining some insights into the tensile process of pure and hybrid woven composite reinforced with brittle and ductile yarns. For this pu...
متن کاملElasto-plastic analysis of discontinuous medium using linearly conforming radial point interpolation method
In this paper, the linearly conforming enriched radial basis point interpolation method is implemented for the elasto-plastic analysis of discontinuous medium. The linear conformability of the method is satisfied by the application of stabilized nodal integration and the enrichment of radial basis functions is achieved by the addition of linear polynomial terms. To implement the method for the ...
متن کاملStress Distribution in Four Restorative Methods in Endodontically Treated Maxillary Premolar: A 3D Finite Element Analysis
Introduction: the Restoration of endodontically treated teeth is critical, and the Awareness of stresses developed by oblique and vertical forces in restorative methods take a great role in treatment plans. Due to the anatomical shape and inherent form of the stress distribution premolars, could be lost by fractures. Some fractures such as vertical fracture which is probable in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013