The Effect of Adhesive Layers on the Dynamic Behavior of Surface-bonded Piezoelectric Sensors with Debonding
نویسندگان
چکیده
The behavior of a piezoelectric sensor is strongly affected by the bonding condition along the interface between the sensor and the host structure. This article presents an analytical study of the effect of the mechanical and geometrical properties of the adhesive layer on the coupled dynamic electromechanical behavior of a thin piezoceramic sensor bonded to an elastic medium. A sensor model with an imperfect adhesive bonding layer is proposed to simulate the two dimensional electromechanical behavior of the integrated system. The analytical solution of the problem is provided by solving the resulting integral equations in terms of the interfacial stress. Numerical simulation is conducted to study the effect of the bonding layer upon the dynamic response of the sensor under different loading frequencies. The interfacial debonding and its effect on the interlaminar strain and stress transfer mechanisms are discussed in detail.
منابع مشابه
Analytical Approach for Vibration Analysis of a Microsensor with Two layers of Silicon and Piezoelectric based on MCST
The vibration analysis is an important step in the design and optimization of microsensors. In most of the cases, COMSOL software is employed to consider the size-dependency on the dynamic behavior in the MEMS sensors. In this paper, the Modified Couple Stress Theory (MCST) is used to capture the size effect on dynamic behavior in a microsensor with two layers of the silicon and piezoelectric. ...
متن کاملEffect of Electric Potential Distribution on Electromechanical Behavior of a Piezoelectrically Sandwiched Micro-Beam
The paper deals with the mechanical behavior of a micro-beam bonded with two piezoelectric layers. The micro-beam is suspended over a fixed substrate and undergoes the both piezoelectric and electrostatic actuation. The piezoelectric layers are poled through the thickness and equipped with surface electrodes. The equation governing the micro-beam deflection under electrostatic pressure is deriv...
متن کاملThe dynamic behaviour of surface-bonded piezoelectric actuators with debonded adhesive layers
The performance of smart structures depends on the electromechanical behaviour of piezoelectric actuators and the bonding condition along the interface, which connects the actuators and the host structures. This paper provides a theoretical study of the effect of partially debonded adhesive layers on the coupled electromechanical behaviour of piezoelectric actuators subjected to high-frequency ...
متن کاملبررسی تأثیر دو نوع ادهزیو و دو نوع وسیله دی باندینگ بر میزان ادهزیو باقیمانده بر روی مینای دندان
Background and Aim: At the end of fixed orthodontic treatment, enamel damages are affected by amount of adhesive remnants. Thus, determining the factors involves in the amount of adhesive remnants e.g. the types of resins and the methods used for debonding is of necessity. The aim of this study was to evaluate the effect of the composite resin type and debonding pliers on enamel surface by a ne...
متن کاملApplication of Piezoelectric and Functionally Graded Materials in Designing Electrostatically Actuated Micro Switches
In this research, a functionally graded microbeam bonded with piezoelectric layers is analyzed under electric force. Static and dynamic instability due to the electric actuation is studied because of its importance in micro electro mechanical systems, especially in micro switches. In order to prevent pull-in instability, two piezoelectric layers are used as sensor and actuator. A current amplif...
متن کامل