Development of Large Refrigerant Compressors

Development of Large Capacity CO2 Scroll Compressor

CO2 refrigerant with a high operating pressure has a large difference between the suction and discharge pressures in compressors. Because of a load increase, the high performance and high reliability of compressors are required. Compared to the scroll compressor employing the conventional refrigerant, the thrust load increases in the CO2 scroll compressor. Therefore the design of thrust bearing...

Estimation, of the Starting Torque, of Refrigerant Rotary Compressors

Estimation of starting torque is very important for motor design and for improvement in compressor efficiency. Especially, when compressors are restarted after a period of inoperation, motors sometimes meet large starting torque. The assumed reasons are as follow . The compressors temperature is sometimes lower than any other parts of the refrigerant cycle. In this case, the refrigerant tends t...

Evaluation of N-Butane as a Potential Refrigerant for Household Compressors

In recent years the household compressor manufacturers have reduced the energy losses inside the compressors resulting in a positive effect on the energy consumption in the cabinets. In the following, N-butane, which is a natural and non ozone depletion refrigerant, is compared to refrigerants presently used in household compressors.

An Investigation of Compressor Slugging Problems

Mathematical models have been popularly applied to study the compression processes of superheated refrigerant vapor in compressors. As to the case when refrigerant enters a compressor cylinder in the state of liquid and vapor mixture, however, the availability of fundamental studies is very limited. -A mathematical model is presented to simulate the compression processes of two-phase saturated ...

Normalization of Test Data for Refrigerant Compressors