Microsphere Formation Using an Excimer Laser

نویسندگان

  • R. P. Lu
  • C. K. Huynh
  • J. M. Kvavle
  • A. D. Ramirez
  • C. A. Keeney
  • Ryan P. Lu
  • Christopher K. Huynh
  • Joshua M. Kvavle
  • Ayax D. Ramirez
چکیده

Silicon microspheres 800 nm to 10 m have been formed using an excimer laser. The method described in this paper shows that microspheres can be formed with high yield and free of contamination. Silicon microspheres enable new applications where silica microspheres fall short. Due to their semiconducting properties, new photonic devices can be developed for nano-electro-optical applications. Keywords-microsphere; MDR; microcavity; resonator; excimer; silicon photonics; WGM

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The 308-nm xenon chloride excimer laser in combination with topical calcipotriol in the treatment of vitiligo

Background: Treatment of vitiligo remains an attractive topic and several therapies with varying degrees of success have been used. The aim of this study was to find out whether the combination of topical calcipotriol and excimer laser increases the efficacy of therapy compared to excimer laser alone. Methods: Twenty eight patients in two groups were treated with 308nm excimer laser alone (14 p...

متن کامل

308-nm excimer laser plus topical calcipotriol in the treatment of vitiligo; A single blind randomized clinical study

Background: There is a large variety of therapeutic agents for the treatment of vitiligo, but it still remains a challenge. Narrow-band UVB phototherapy and 308-nm excimer laser have been shown to be safe and effective for the treatment of vitiligo. Topical calcipotriol has recently been reported to enhance the efficacy of phototherapy, especially 8-methoxypsoralen plus UVA (PUVA). The goal of ...

متن کامل

The formation of moulds for 3D microstructures using excimer laser ablation

Fabrication by the ‘Laser-LIGA’ process of three-dimensional structures for micro-fluidic devices is investigated. Polymer moulds are formed by projection ablation using an excimer laser operating at 248 nm wavelength. The moulds are replicated by electroforming — as in conventional X-ray LIGA — to produce fixed and freely moving nickel microturbine parts with heights of 150 lm, wall angles of ...

متن کامل

Photosensitivity in Ge-doped silica optical waveguides and fibers with 193-nm light from an ArF excimer laser.

Photosensitivity in optical fibers and waveguides has been associated with the bleaching of an absorption band located near 5.0 eV (or 242 nm). We present new results for Bragg grating formation and UV bleaching experiments carried out using 193-nm light from an ArF excimer laser instead of the usual laser sources operating near 242 or 248 nm.

متن کامل

Cytotoxicity and mutagenicity of low intensity, 248 and 193 nm excimer laser radiation in mammalian cells.

The cytotoxicity of 193 and 248 nm excimer laser radiation was compared to that produced by a germicidal lamp (predominantly 254 nm) using Chinese hamster ovary cells (CHO), and a human diploid fibroblast line, AG-1522A. Excimer laser radiation at 248 nm (3.5 X 10(2) w/m2) and germicidal radiation (5.3 X 10(-5) w/m2) caused toxicity in both cell lines, with the AG-1522A cells (D37 = 7-8 J/m2) b...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012