Effects of approach lighting and variation in visible runway length on perception of approach angle in simulated night landings.
نویسندگان
چکیده
Previous experiments in this laboratory have demonstrated illusions due to variations in both length and width of runways in nighttime "black hole" approaches. Even though approach lighting is not designed to provide vertical guidance, it is possible that cues from approach lights could interact with cues from runway lighting to reduce illusions due to variation in runway size. Two experiments were conducted to evaluate the effect of approach lighting on perception of approach angle in simulated night approaches. In the first experiment, 40 pilots made simulated visual approaches to a 150- by 6,000-ft runway (45.7-1829 m) with and without a 3,000-ft approach (914 m) light system (ALSF-2). Pilots controlled a moving runway model to produce a constant "normal" angle of approach over the distance range of 23,000 ft (7010 m) to 8,000 ft (2438 m) from threshold. In the second experiment, 24 pilots made simulated approaches to a 150- by 6,000-ft runway which was either fully visible or which had lights of the upwind half occluded. In addition, a 1,400-ft (427 m) abbreviated approach light system (SSALS) was used at three intensities. Decreasing the visible length of the runway by occulting lights of the far half increased mean generated approach angles from 2.2 degrees to 2.7 degrees in agreement with results of a previous experiment involving similar lengths of runways. Neither the presence of equal intensity approach lights nor uncomfortable glare from approach lights 20 times brighter than runway lights had an effect of practical significance on responses. These findings reinforce previous experimental demonstrations of the importance of runway size cues related to varying runway length, and also show that potential size cues provided by approach lights do not prevent illusions due to variations in runway size.
منابع مشابه
Glideslope Perception During Aircraft Landing
Ideally, when a pilot approaches a runway on their final approach for landing, they must maintain a constant trajectory, or glideslope, of typically 3°-4°. If pilots misperceive their glideslope and alter their flight path accordingly, they are likely to overshoot or undershoot their desired touch down point on the runway. This experiment examined the accuracy of passive glideslope perceptions ...
متن کاملA Statistical Analysis of the Aircraft Landing Process
Managing operations of the aircraft approach process and analyzing runway landing capacity, utilization and related risks require detailed insight into the stochastic characteristics of the process. These characteristics can be represented by probability distributions. The focus of this study is analyzing landings on a runway operating independent of other runways making it as a single runway. ...
متن کاملHead-eye coordination during simulated orbiter landing.
BACKGROUND Orbiter landing data show decrements in pilot performance following spaceflight compared to preflight simulated landings. This study aimed to characterize pilot head-eye coordination during simulated orbiter landings, and relate findings to microgravity-related spatial disorientation. METHODS Orbiter landings were simulated in an A340-300 simulator flown by six pilots. Turns about ...
متن کاملA Study on the Laser Tube Bending Process: Effects of the Irradiating Length and the Number of Irradiating Passes
In this paper, the laser bending process of a circular tube made of mild steel has been investigated experimentally. For this purpose, the effects of the irradiating length and the number of irradiating passes on the main bending angle of a laser bent tube are studied. In addition, the main defects of the laser tube bending process such as lateral bending angle, ovality and thickness variation ...
متن کاملPrediction of Extrusion Pressure in Vortex Extrusion Using a Streamline Approach
Vortex extrusion (VE) is a severe plastic deformation technique which is based on the synergies between high strain accumulation and high hydrostatic pressure. Such a high amount of pressure, places a mandate to seek the method for investigation of the load under processing conditions. For this, kinematically admissible velocity field and upper bound terms based on Bezier formulation are develo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Aviation, space, and environmental medicine
دوره 54 6 شماره
صفحات -
تاریخ انتشار 1983