The Software Anatomy of a Flexible Accelerator Simulation Engine
نویسندگان
چکیده
A modular, maintainable and extensible particle beam simulation architecture is presented. Design considerations for single particle, multi particle, and rms envelope simulations (in two and three dimensions) are outlined. Envelope simulation results have been validated against Trace3D. Hybridization with a physics-centric contol-system abstraction provides a convenient environment for rapid deployment of applications employing model-reference control strategies.
منابع مشابه
Improving Simulation Accuracy of a Downsized Turbocharged SI Engine by Developing a Predictive Combustion Model in 1D Simulation Software
In this paper we aim to develop a predictive combustion model for a turbocharged engine in GT-Power software to better simulate engine characteristics and study its behavior under variety of conditions. Experimental data from combustion was initially being used for modelling combustion in software and these data were used for model calibration and result validation. EF7-TC engine was chosen for...
متن کاملImproved Turbine Engine Hierarchical Modeling and Simulation Based on Engine Fuel Control System
Aircraft engines constitute a complex system, requiring adequate mon-itoring to ensure flight safety and timely maintenance. The best way to achieve this, is modeling the engine. Therefore, in this paper, a suitable mathematical model from engine controller design point of view, for a specific aero turbine engine is proposed by the aid of MATLAB/Simulink software. The model is capable of reduc...
متن کاملEffect of Direct Injection Diesel Engine Convert to Sequential Injection CNG Engine in Intake Port Gas Flow Pressure Profile
The one dimension computational model of a sequential injection engine, which runs on compressed natural gas (CNG) with spark ignition, is developed for this study, to simulate the performance of gas flow pressure profile, under various speed conditions. The computational model is used to simulate and study of the steady state and transient processes of the intake manifold. The sequential injec...
متن کاملSimulation of Subcooled Flow Boiling Occurring in Internal Combustion Engine Water Jacket by Numerical Modeling in a Channel with Hot Spot
Boiling heat transfer always has been proposed as a solution for enhancing heat transfer between the fluid and solid surfaces. Subcooled flow boiling is one of the mechanisms that occur in Internal Combustion Engine water jacket in which high amounts of heat is transferred. In this research, it has been tried to simulate subcooled flow boiling in a geometry similar to coolant channel inside the...
متن کاملبهینه سازی چندراهه ورودی موتور XU7/L3 با هدف افزایش بازده تنفسی
The objective of this work was to develop a new design of an intake manifold through a 1D simulation. It is quite familiar that a duly designed intake manifold is essential for the optimal performance of an internal combustion engine. Air flow inside the intake manifold is one of the important factors, which governs the engine performance and emissions. Hence the flow phenomenon inside the i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002