Discussion over the design assumption of buckling length “ 2 a ” for studs braced by sheathing Student : Luiz Vieira
نویسندگان
چکیده
منابع مشابه
Bracing Stiffness and Strength in Sheathed Cold-formed Steel Stud Walls
The objective of this paper is to provide the stiffness and strength characteristics for coldformed steel stud walls stabilized by sheathing. The primary stability resistance is provided by translational (lateral) stiffness supplied at the fastener locations to the cold-formed steel studs. This paper separates the source of this translational stiffness into two parts: local and diaphragm. To an...
متن کاملAnalysis of Sheathed Cold-Formed Steel Wall Studs
The strength of sheathed wall systems is substantially greater than unsheathed walls with the same studs. Testing on studs sheathed on both sides with dry gypsum board demonstrate strength increases as large as 70% over unsheathed studs (Miller and Peköz 1993, Miller and Peköz 1994). The current AISI Specification for sheathed wall stud systems are complicated, only apply when the sheathing is ...
متن کاملCyclic Testing of Braces Laterally Restrained by Steel Studs
This paper experimentally investigates the cyclic inelastic performance of concentrically braced frames with and without cold formed steel stud ~CFSS! infills designed to laterally restrain braces and delay their buckling. Specimens have either diagonal tube or solid bar braces with and without CFSS and U brackets providing out-of-plane and in-plane buckling restraint. Behavioral characteristic...
متن کاملEvaluating the Performance of the Buckling Restrained Braces in Tall Buildings with peripherally braced frames
In recent years, seismic design of structures has been undergoing significant changes due to increasing demand for optimization and minimizing the level of damage and reducing the cost of structural repairs. Development of analytical methods and remarkable improvements of computer performance have been among the factors which influenced the design of structures. A lot of research has been condu...
متن کاملInvestigation of the Distribution of Cumulative Ductility Demand Parameter in Various Storeys of Buckling Restrained Braced Frames
Due to the fact that the buckling-restrained brace core yields subject to both tension and compression, it can adsorb energy and exhibit high ductility rendering it proper for tolerating earthquake loads. One of the important objectives of seismic standards is safeguarding the appropriate ductility for the structures because the structures, in case of being ductile, can dissipate a considerable...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008