The Design of Regional Compensation DVR in Medium Voltage System
ثبت نشده
چکیده
The design of a Dynamic Voltage Restorer that is suitable for compensating regional voltage sags in 10kV distribution system is introduced in this paper. The design of the main circuit based on cascaded H-bridge, the device for energize DVR and the transformer-less coupled circuit are presented. For the voltage sags in neutral point non-grounded system, a reference voltage calculation method with the aim is to restore the line voltages on the load side is put forward. The simulation model of a substation including the designed DVR device has been built in PSCAD, and the compensation results under different fault types are simulated and analyzed, the influence of the energize device on the distribution system is studied. The simulation results verify the correctness and effectiveness of the design of DVR hardware and the reference voltage calculation method.
منابع مشابه
Control of DVR by Fuzzy Controller to Improve Voltage in Distribution System
With the development of critical loads, power quality problem has become particularly important and poor power quality will be cause many adverse effects and the cost of many deaths will follow. To improve power quality and protection of sensitive loads against grid disturbances have been used new equipment based on power electronics similar FACTs devices, they are Custom Power. One of the most...
متن کاملVoltage Sag Compensation with DVR in Power Distribution System Based on Improved Cuckoo Search Tree-Fuzzy Rule Based Classifier Algorithm
A new technique presents to improve the performance of dynamic voltage restorer (DVR) for voltage sag mitigation. This control scheme is based on cuckoo search algorithm with tree fuzzy rule based classifier (CSA-TFRC). CSA is used for optimizing the output of TFRC so the classification output of the network is enhanced. While, the combination of cuckoo search algorithm, fuzzy and decision tree...
متن کاملThe Design of Regional Compensation DVR in Medium Voltage System
Abstract. The design of a Dynamic Voltage Restorer that is suitable for compensating regional voltage sags in 10kV distribution system is introduced in this paper. The design of the main circuit based on cascaded H-bridge, the device for energize DVR and the transformer-less coupled circuit are presented. For the voltage sags in neutral point non-grounded system, a reference voltage calculation...
متن کاملThe Effectiveness of Dynamic Voltage Restorer with the Distribution Networks for Voltage Sag Compensation
This paper discusses the Dynamic voltage restorer (DVR) operation and control for Voltage sags compensation. DVR is a series connected power electronic based device that can quickly mitigate the voltage sags in the system and restore the load voltage to the pre-fault value. Voltage sag associated with faults in transmission and distribution systems, energizing of transformers, and starting of l...
متن کاملاثر DVR بر بهبود کمبود و بیشبود ولتاژ سیستم توزیع در شرایط هارمونیکی (یادداشت فنی)
Today, with attention to increase in sensitive electrical equipments application in distribution networks and their susceptibility to the power quality deficiencies, the protection necessity of sensitive loads against undesirable effects of these disturbances are in focus. So, in this paper voltage sag deficiency and Dynamic Voltage Restorer (DVR) would be introduced as the most prevalent power...
متن کامل