HEV battery heating using AC currents
نویسندگان
چکیده
A unique method has been developed for internally heating hybrid electric vehicle (HEV) batteries at cold temperatures using alternating current (AC). The poor performance of these batteries in cold climates is of major concern because they suffer a huge loss in capacity. Another symptom of this low performance is a dramatic increase in the series resistance of the battery, R B , as the temperature drops. Experiments were performed with both low and high frequency heaters, and several tests were conducted on both lead acid and nickel metal hydride (NiMH) batteries at different AC amplitudes, states of charge (SOCs) and cold temperatures. Low frequency 60 Hz heating was first tested on several different 38 Ah lead acid batteries. The feasibility of using high frequency heating was then tested using a 10–20 kHz inverter on a pack of 6.5 Ah nickel metal hydride (NiMH) batteries. A technique also was developed to estimate the internal battery temperature, T bat , by measuring the battery source resistance, R B .
منابع مشابه
Cooling and Preheating of Batteries in Hybrid Electric Vehicles
The performance of a hybrid electric vehicle (HEV) depends strongly on the performance of its high-voltage battery pack, which is influenced by temperature. We have been working on thermal management of batteries in HEVs, including cooling and heating issues. In cold temperatures, batteries perform poorly because of high internal resistance; the vehicle may start slowly. The battery may need to...
متن کاملEffects of High Frequency AC Currents on Cold Temperature Battery Performance
A unique method has been developed for internally heating hybrid electric vehicle batteries at cold temperatures using high frequency alternating currents (AC). The poor performance of these batteries in cold climates is of major concern because they suffer a huge loss in capacity. Another symptom of this low performance is a dramatic increase in the series resistance of the battery, RB, as the...
متن کاملDSP Based Control Hybrid Electric Vehicle
Development of power electronics and real time control technology for Hybrid Electric Vehicle (HEV) is presented. These include AC drives with real time torque control, compact and rugged induction motors, auxiliary electric circuits etc. In this paper developed a set of DSP based circuits for AC Induction Motor Drives for EVs. It provides torque control for propulsion and power control for gen...
متن کاملLarge Lithium Polymer Battery Modeling for the Simulation of Hybrid Electric Vehicles Using the Equivalent Circuit Method
In the present study, a model of a large Lithium Polymer (Li-Po) battery for use in the simulation of Hybrid Electric Vehicles (HEVs) is developed. To attain this goal, an Equivalent Circuit (EC) consisting of a series resistor and two RC parallel networks is considered. The accuracy and the response time of the model for use in an HEV simulator are studied. The battery parameters identifica...
متن کاملThe effects of high frequency current ripple on electric vehicle battery performance
The power electronic subsystems within electric vehicle (EV) powertrains are required to manage both the energy flows within the vehicle and the delivery of torque by the electrical machine. Such systems are known to generate undesired electrical noise on the high voltage bus. High frequency current oscillations, or ripple, if unhindered will enter the vehicle’s battery system. Real-world measu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003