EFFECTS OF A BATH COMPOSITION ON ALUMINIUM LOSS DURING Ti-Al ALLOY SMELTING IN A VACUUM INDUCTION FURNACE
نویسنده
چکیده
L. Blacha, A. Smalcerz Silesian University of Technology, Faculty of Materials Engineering and Matallurgy, Katowice, Poland K. Michalek Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Ostrava, Czech Republic M. Warzecha University of Częstochowa, Faculty of Materials Processing Technology and Applied Physics, Częstochowa, Poland In the paper, results of a kinetic analysis of aluminium evaporation from binary Ti-Al alloys during their smelting in a vacuum induction furnace are presented.
منابع مشابه
A 2-D FINITE ELEMENT MODEL SIMULATION OF THE MELTING PROCESS OF Al-Ti ALLOY IN VACUUM INDUCTION FURNACE WITH COLD CRUCIBLE (VIFCC)
The development of a numerical model for the melting process of Al-Ti alloy target material in vacuum induction furnace with cold crucible (VIFCC) was described. It is a two-dimensional computational methodology to calculate electromagnetic field, heat transfer field and fluid flow field . Based on the aid of the finite element method with the commercial software—ANSYS, a superimposition method...
متن کاملEFFECT OF MISH METAL TYPE ON THE MICROSTRUCTURE AND ABSORPTION/DESORPTION CHARACTERISTICS OF MMNI5 HYDROGEN STORAGE ALLOY
In this article, the effects of Pr and Nd were investigated on the microstructure and absorption/desorption characteristics of MmNi5 hydrogen storage alloy. The alloys were prepared in Vacuum induction furnace and the microstructures and phases were analyzed using scanning electron microscopy (SEM) equipped with energy dispersive X-ray analysis (EDS) and X-ray diffraction (XRD). Hydrogen absorp...
متن کاملSynthesis of Nanostructure Ti-45Al-5Cr Alloy by Mechanical Alloying and Study the Effect of Cr Addition on Microstructure of TiAl Alloy
In this work, mechanical alloying was employed to produce Ti-50Al and Ti-45Al-5Cr (at%) alloys. Alloying was performed in a planetary mill and the alloying time varying from 5 to 70h. Characterization of the powder mixture was performed by X-ray diffraction (XRD), SEM analyses and DTA test, during mechanical alloying and after annealing at 1100°c in vacuum oven. The results showed, after 50h of...
متن کاملTHE EFFECTS OF MASS TRANSFER IN THE LIQUID PHASE ON THE RATE OF ALUMINIUM EVAPORATION FROM THE Ti-6Al-7Nb ALLOY
L. Blacha, Silesian University of Technology, Faculty of Materials Engineering and Metallurgy, Katowice J. Mizera, Warsaw University of Technology, Faculty of Materials Engineering, Warszawa P. Folęga, Silesian University of Technology, Faculty of Transport, Katowice, Poland In the present paper, the rate of aluminium evaporation from the Ti-6Al-7Nb alloy during smelting with the use of VIM met...
متن کاملArsine poisoning.
Nature of the Accident Tin is manufactured on a very large scale in Bootle. It occurs naturally as pyrites, and arsenic is an invariable contaminant. The chemical composition of the ores varies considerably but arsenic is present in a concentration of up to 3 %. The tin is liberated from its ores by heating with carbon. The arsenical impurities float to the surface of the molten tin and form a ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014