The mechanical role of the cranial base in palatal shelf movement: an experimental re-examination.

نویسندگان

  • L L Brinkley
  • M M Vickerman
چکیده

Straightening of a cranial base flexure observed in the midsagittal presphenoid region of mice has been postulated to play a major role in palate closure by providing the internal shelf force for palatal shelf movement. The straightening is thought to take place during the 8 h immediately preceding closure. This mechanical model assumes that straightening of the cranial base flexure is transmitted laterally to the alar regions of the sphenoid and then downward to the palatal shelves. According to this hypothesis, if the flexure did not straighten or the force generated by this form change was not transmitted to the palatal shelves, movement to the horizontal plane should not take place. Physical disruption of the area of the flexure should remove the potential for form change through force transmission. SwissWebster mouse fetuses which were 18 or 24 h prior to palate closure were obtained and the heads removed. Tongue and brain were then removed from each head. In the experimental specimens a midsagittal lesion, averaging 407 /tm in length and 84 /tm in width, extending from the nasal septum through the craniopharyngeal area was made. This lesion ablated the flexure region of the cranial base far in advance of the time straightening is thought to take place. Heads of litter-mates with intact cranial bases served as controls. Specimens with intact and ablated flexures were suspended in a submerged, circulating culture system which was continuously gassed. After 18 h of culture, palatal shelf elevation had occurred in fetuses of both ages whether or not their cranial bases were intact. Palatal shelf elevation in vitro does not require an intact cranial base.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Developmental aspects of secondary palate formation.

Research on development of the secondary palate has, in the past, dealt primarily with morphological aspects of shelf elevation and fusion. The many factors thought to be involved in palatal elevation, such as fetal neuromuscular activity and growth of the cranial base and mandible, as well as production of extracellular matrix and contractile elements in the palate, are mostly based on gross, ...

متن کامل

A cellular mechanism for the palatal shelf reorientation from a vertical to a horizontal plane in hamster: light and electron microscopic study.

Cellular and subcellular events during reorientation of the palatal shelf in hamster fetuses are described. An alteration in the morphology of the epithelial and the mesenchymal cells is observed during shelf realignment from a vertical to a horizontal plane. The mesenchymal cells elongate and subsequently appear to protrude in the medially bulging palatal shelf. Microtubules, microfilaments an...

متن کامل

The effects of chlorcyclizine-induced alterations of glycosaminoglycans on mouse palatal shelf elevation in vivo and in vitro.

To define whether glycosaminoglycans play a role in palatal shelf movement, we studied the morphology and elevation behaviour of chlorcyclizine-treated mouse palatal shelves. Chlorcyclizine treatment was used because this agent enhances degradation of the palatal glycosaminoglycans, hyaluronate and chondroitin sulphates, with little or no effect on their synthesis. Use of in vitro and in vivo e...

متن کامل

Chondrosarcoma of cranial vault: case report and review of literature

Chondrosarcoma is a rare malignant cartilage forming tumour usually arising from long bones and rarely seen in cranium. In cranium it is seen to commonly arises from skull base with skull vault being a highly unusual site. We report a case of a 30-year female presenting with complaints of headache for 6 months found to have a large chondrosarcoma in right fronto-parietal region which is an extr...

متن کامل

Effect of Speed and Number of Pass in Friction Stir Welding on the Mechanical and corrosion behavior of Commercial Pure Copper

The results showed that the microhardness and tensile strength of the heat-affected zone as the weakest welding zone in some samples reduced up to 30% compared to the base metal. On the other hand, a decrease in rotational speed, an increase in tool movement speed, and the number of welding passes cause grain refinement and improve mechanical properties. However, the effect of decreasing the ro...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of embryology and experimental morphology

دوره 48  شماره 

صفحات  -

تاریخ انتشار 1978