Output process characterization for fast token ring networks supporting two priorities
نویسندگان
چکیده
A performance model for the fast token ring connected to an output link via a switching node is considered. For each station, traffic streams of two priority classes are supported. Poisson packet arrival process, Erlang-Kpacket length distribution and zero walk time are assumed. The output process of one fast token ring with a switching node is characterized by using a 3-phase Markov Modulated Erlang Process (MMEP). The numerical results indicate that the required output link capacity predicted by this approximated process can be much less than the estimation based on the Poisson Process assumption, provided that the congestion at the switching node is kept at the same level.
منابع مشابه
Token Ring Project
Ring topology is a simple configuration used to connect processes that communicate among themselves. A number of network standards such as token ring, token bus, and FDDI are based on the ring connectivity. This article will develop an implementation of a ring of processes that communicate among themselves via pipe links. The processes are nodes in the ring. Each process reads from its standard...
متن کاملPerformance Analysis C)f a Protocol for Real Time Token Ring Folan
An artended IEEE 802.5 protocol suitable for transmitting time consh-dm'ed messages in real time token ring fibre optic local area networks has been proposed and analysed for its performance subsequently. It differs from the tmhtional token ring protocols as time COIlstraints of messages are i n v t e d explicitly. In this protocol, the laxities of messages are mapped into priorities. The messa...
متن کاملAn Efficient Priority Mechanism for Rings
The paper presents a new scheme for handling priorities in a token ring Local Area Network. The scheme of the IEEE -802.5 standard suffers from two principal drawbacks that are addressed in the present paper: it allows frame multiplication for a limited duration. and in some situations. a long time is required to achieve the desired priority level. This paper describes and proves a new priority...
متن کاملReal-time communication in FieldBus multiaccess networks
There has been an increasing need of timely and predictable communication services for embedded real-time systems in automated factories and industrial process controls. Work has been done on real-time communication with deadline guarantees in point-to-point, token bus/token ring/FDDI, and DQDB (Distributed Queue Dual Bus) networks. However, due to the random access nature of the CSMA/CD type m...
متن کاملO N Improving the Fault Detection and Reliability in Fddi Networks
FDDI (Fiber Distributed Data Interface) is a 100 Mbps token ring network with two counter rotating optical rings. Various possible faults (like lost token, link failures etc.) are considered and fault detection and the ring recovery process in case of a failure and the reliability mechanisms provided are studied. We suggest a new method to improve the fault detection and ring recovery process. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Computer Communications
دوره 20 شماره
صفحات -
تاریخ انتشار 1997