Field Programmable Multi - Chip Module ( FPMCM ) - An Integrationof FPGA and MCM
نویسندگان
چکیده
of FPGA and MCM Technology Joel Darnauer, Tsuyoshi Isshiki, Por rio Garay, John Ramirez, Vijayshri Maheshwari, Wayne Wei-Ming Dai Applied Sciences Building, Computer Engineering, UC Santa Cruz, Santa Cruz, CA 95064 Internet: @ce.ucsc.edu Abstract Multichip module technology can be used to dramatically increase the capability and performance of eld programmable gate arrays (FPGAs) and the eld programmable systems (FPS) that they are a part of. After an analysis of the key advantages that MCM technology has for FPGAs, we present the design of our rst-generation silicon-on-silicon eld programmable multi-chip module (FPMCM), analyze its limitations, and present some lessons learned in the development process. We conclude with a comparison of MCM-C and MCM-D technology for this application and suggest that the case for MCM-D for FPMCMs is most compelling when MCM-D is considered as a doorway to active substrate and chip-on-chip technologies.
منابع مشابه
A Field Programmable Multi-chip Module (FPMCM)
Multi-chip module (MCM) packaging can reduce the cost and increase the utility of eld programmable systems. We are currently developing a rst generation Field Pro-grammable Multi-chip Module (FPMCM) as a test vehicle for a particular MCM technology. We present the advantages of MCM for eld programmable systems and develop analytical models for estimating the capacity of FPMCM architectures base...
متن کاملReconngurable Processor Board
The concept of dynamic recon gurability combines advantages of hardware and software. The goal is to make use of the structural advantages of hardware without losing the exibility of software. In this paper we present a recon gurable processor board which is based on the concept of dynamic recon gurability. We emphasize on the dynamic recon gurability of the system and the multi-chip module (MC...
متن کاملDevelopment of a DSP/MCM Subsystem Assessing Low-volume, Low-cost MCM Prototyping for Universities
1 This work was sponsored in part by ARPA under grant DAAH04-94-G-0004 Abstract This paper discusses the design and development of a general-purpose programmable DSP subsystem packaged in a multichip module. The subsystem contains a 32-bit floating-point programmable DSP processor along with 256 K-byte of SRAM, 128 K-byte of FLASH memory, 10 K-gate FPGA and a 6-channel 12-bit ADC. The complete ...
متن کاملFPGA Implementation of FIR Filter Design with Optimization of Adder Tree & Constant Multiplication
Finite Impulse Response filter is mostly used in the digital signaling processing (DSP) applications. In FIR most important parameters are complexity, cost, and power consumption. While the research focus of resolve the thus parameter to be reduced. To use the Multiple Constant Multiplication (MCM) for optimize the adder tree in the filter. In this paper we have identified the resource minimiza...
متن کامل