Ribbon plastic optical fiber linked optical transmitter and receiver modules featuring a high alignment tolerance.

نویسندگان

  • Hak-Soon Lee
  • Jun-Young Park
  • Sang-Mo Cha
  • Sang-Shin Lee
  • Gyo-Sun Hwang
  • Yung-Sung Son
چکیده

Ribbon plastic optical fiber (POF) linked four-channel optical transmitter (Tx) and receiver (Rx) modules have been proposed and realized featuring an excellent alignment tolerance. The two modules share a common configuration involving an optical sub-assembly (OSA) with vertical cavity surface emitting lasers (VCSELs)/photodetectors (PDs), and their driver ICs, which are integrated onto a single printed circuit board (PCB) substrate. The OSA includes an alignment structure, a beam router and a fiber guide, which were produced by using plastic injection molding. We have accomplished a fully passive alignment between the VCSELs/PDs and the ribbon POF by taking advantage of the alignment structure that serves as a reference during the alignment of the constituent parts of the OSA. The electrical link, which largely determines the operation speed, has been remarkably shortened, due to a direct wire-bonding between the VCSELs/PDs and the driver circuits. The light sources and the detectors can be individually positioned, thereby overcoming the pitch limitations of the ribbon POF, which is made up of perfluorinated graded-index (GI) POF with a 62.5 μm core diameter. The overall alignment tolerance was first assessed by observing the optical coupling efficiency in terms of VCSEL/PD misalignment. The horizontal and vertical 3-dB alignment tolerances were about 20 μm and 150 μm for the Tx and 50 μm and over 200 μm for the Rx, respectively. The VCSEL-to-POF coupling loss for the Tx and the POF-to-PD loss for the Rx were 3.25 dB and 1.35 dB at a wavelength of 850 nm, respectively. Subsequently, a high-speed signal at 3.2 Gb/s was satisfactorily delivered via the Tx and Rx modules over a temperature range of -30 to 70°C with no significant errors; the channel crosstalk was below -30 dB. Finally, the performance of the prepared modules was verified by transmitting a 1080p HDMI video supplied by a Bluelay player to an LCD TV.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

CWDM based HDMI interconnect incorporating passively aligned POF linked optical subassembly modules.

A four-channel transmitter OSA (TOSA) and a receiver optical sub-assembly (ROSA) module were presented. They take advantage of a coarse WDM (CWDM) scheme, employing two types of VCSELs at 780 and 850 nm, where no wavelength filters are involved in the TOSA. The ROSA and TOSA were constructed through a fully passive alignment process using components produced by virtue of a cost effective plasti...

متن کامل

An overview of micromachining for optical communications - Optical Fiber Communication. OFC 97., Conference on

Figure 3(a) shows a temperature dependence ofthe fiber output and monitor current for one of the fabricated 50 samples of the plastic module. The fiber output was 0.2 mW in the full operating temperature range from -40-85°C. The monitor current was >lo0 (*.A at 0.2 mW fiber output and the trackingwidth of < + -20% was obtained in the full temperature range. The rise and fall time ofthe transmit...

متن کامل

Signal Optimization During Radio Links Between a Transmitter and a Receiver Located in Adjacent Material Media with Differing Optical Densities (TECHNICAL NOTE)

Signal optimization is affected during radio links between a transmitter and a receiver located in adjacent material media with differing optical densities. The optimization is carried out via the automated control theory method. The radio signal obtained after the optimization is coordinated with the two media's electrical characteristics simultaneously; and this enables low power and small an...

متن کامل

Auto-Configurable Optical Linking Modules for Mobile Free Space Optical Communications

Existence of line of sight (LOS) and perfect alignment between the communicating modules is one of the key requirements for free space optical communication. To ensure uninterrupted data flow, auto-aligning transmitter and receiver modules are necessary. We propose a new approach based on spherically shaped transmitter and receiver modules (optical antenna) for maintaining optical links even wh...

متن کامل

ISSCC 2011 / SESSION 25 / CDRs & EQUALIZATION TECHNIQUES / 25 . 7 25 . 7 A 10 Gb / s Half - UI IIR - Tap Transmitter in 40 nm CMOS

Two commercially important standards for 10Gb/s serial data transfer include the SFI specification, associated with SFP+ optical modules and copper twinaxial cable [1], and the 10GBASE-KR specification for backplane channels in computer servers and networking equipment [2]. The SFI specification requires the transmitter to operate with both low data-dependent jitter (DDJ) and low transmitter wa...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics express

دوره 19 5  شماره 

صفحات  -

تاریخ انتشار 2011