Electrical characteristics of an organic bistable device using an Al/Alq3/nanostructured MoO3/Alq3/p-Si structure
نویسندگان
چکیده
The electrical properties of a device with an Al /Alq3/nanostructured MoO3 /Alq3 /p+-Si structure were investigated for organic resistance switching memories. The conductance of the device can be electrically switched to either high conductance or low conductance. The bistable switching of the device is attributed to the MoO3 nanoclusterlike layer interposed between the Alq3 thin films. When the device was switched to high conductance, a space-charge field dominated carrier transportation of the device. The space-charge field was resulted from charges trapped in the MoO3 nanoclusterlike layer. Both retention measurement and write-read-erase-read cycles of the device are also provided. © 2010 American Institute of Physics. doi:10.1063/1.3299265
منابع مشابه
Tuning of the electrical characteristics of organic bistable devices by varying the deposition rate of Alq3 thin film
Organic bistable devices with an Al/Alq3/n-type Si structure are investigated at different deposition rates of Alq3 thin film. We can obtain current–voltage characteristics of these devices similar to those of metal/organic semiconductor/metal structures that are widely used for organic bistable devices. The bistable effect of the Al/Alq3/n-type Si structure is primarily caused by the interface...
متن کاملDevice characteristics of organic light-emitting diodes based on electronic structure of the Ba-doped Alq3 layer.
Organic light-emitting diodes (OLEDs) with a Ba-doped tris(8-quinolinolato)aluminum(III) (Alq3) layer were fabricated to reduce the barrier height for electron injection and to improve the electron conductivity. In the OLED consisting of glass/ITO/4,4',4"-tris[2-naphthylphenyl-1-phenylamino]triphenylamine (2-TNATA, 30 nm)/4,4'-bis[N-(1-napthyl)-N-phenyl-amino]-biphenyl (NPB, 18 nm)/Alq3 (42 nm)...
متن کاملDependence of film morphology on deposition rate in ITO/TPD/Alq3/Al organic luminescent diodes
Organic multilayers of N,N0-diphenyl-N,N0-bis(3-methylphenyl)-1,10-biphenyl-4,40-diamine(TPD)/aluminum tris(8hydroxyquinoline)(Alq3) were evaporated on the indium tin oxide (ITO) coated glass substrates under different conditions. The effect of deposition rate on the surface morphology of top Alq3 films and I–V curves of organic luminescent diodes (OLED)s is studied, in order to optimize the Al...
متن کاملسنتز Alq3و تاثیر غلظت آن بر عملکرد دیودهای نورگسیل آلی با دو ساختار مخلوطی تک لایه و ساختار چند لایه
In this article, organic light emitting diode with the two structures of ITO / PEDOT: PSS /PVK/Alq3/PBD/Al and ITO/PEDOT: PSS/PVK: Alq3: PBD/Alwith different concentrations were fabricated. The effects of concentration of Alq3 complex on the characteristics of diodes, which were made, were studied. Layers with the same weight percentages PVK, PBD and different wt. %Alq3 by spin coating on PEDOT...
متن کاملImproved performance of organic light-emitting diodes with MoO3 interlayer by oblique angle deposition.
We fabricated and demonstrated improved organic light emitting diodes (OLEDs) in a thin film architecture of indium tin oxide (ITO)/ molybdenum trioxide (MoO3) (20 nm)/N,N'-Di(naphth-2-yl)-N,N'-diphenyl-benzidine (NPB) (50 nm)/ tris-(8-hydroxyquinoline) (Alq3) (70 nm)/Mg:Ag (200 nm) using an oblique angle deposition technique by which MoO3 was deposited at oblique angles (θ) with respect to the...
متن کامل