Electron Conditioning of Technical Aluminium Surfaces
نویسندگان
چکیده
This note do consider a conventional conversion target and th Since the length of the i concurrent pressure puls of T
منابع مشابه
Electron Conditioning of Technical Aluminium Surfaces: Effect on the Secondary Electron Yield
The effect of electron conditioning on commercially aluminium alloys 1100 and 6063 were investigated. Contrary to the assumption that electron conditioning, if performed long enough, can reduce and stabilize the SEY to low values (≤ 1.3, value of many pure elements [1]), the SEY of aluminium did not go lower than 1.8. In fact, it reincreases with continued electron exposure dose.
متن کاملScanning Electron Microscope Comparative Evaluation of Feldspathic Porcelain Surfaces under Irradiation by Different Powers of Neodymium-Doped Yttrium Aluminium Garnet (Nd:YAG) Laser.
INTRODUCTION Recent use of lasers for porcelain surface treatment for adhesion of brackets to restorations has not only showed some promising results, but is also accompanied with less undesirable effects among other advantages. The purpose of this study is the comparative electron microscope evaluation of feldspathic porcelain surfaces under irradiation by Neodymium-Doped Yttrium Aluminium Gar...
متن کاملTENSILE AND FRACTURE CHARACTERISTICS OF A SIC- PARTICLE-REINFORCED 7075 ALUMINIUM ALLOY
Fracture behavior of a 7075 aluminium alloy reinforced with 15 Vol%. SiC particles was studied after T6 and annealing heat treatments under uniaxial tensile loading at room temperature. The scanning electron microscopy of fractured surfaces and EDS analysis showed:, that fracture mechanism changed from due mainly to fractured particle in T6 condition to interface decohesion in samples in anneal...
متن کاملEUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CERN - ACCELERATORS AND TECHNOLOGY SECTOR Secondary Electron Yield on Cryogenic Surfaces as a Function of Physisorbed Gases
Electron cloud is a serious limitation for the operation of particle accelerators with intense positively charged beams. It occurs if the secondary electron yield (SEY) of the beam-pipe surface is sufficiently high to induce an electron multiplication. At low surface temperatures, the SEY is strongly influenced by the nature of the physisorbed gases and by the corresponding surface coverage. Th...
متن کاملBiomimetic and Bioinspired Anti-adhesive and Antimicrobial Surfaces
Macroand microfouling cause serious problems in many kinds of technical equipment. Consequently, there is great interest in the development of surfaces with anti-adhesive and antimicrobial properties. A range of surfaces with such properties exist in nature and artificial systems that mimic or are inspired by these natural systems could potentially be valuable technical surfaces. SmartMembranes...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004