Statistical modeling of the indoor radio channel at 10 GHz through propagation measurements .I. Narrow-band measurements and modeling
نویسندگان
چکیده
The aim of this paper is to report the results of a propagation measurement experiment to reach a statistical model of the indoor radio channel at 10 GHz using directive antennas at both terminals. The measurements were conducted on a floor of a university building. The distribution of the received fading envelope was tested to fit the Rayleigh and Rician distributions, but were not satisfactory. The Nakagami distribution was found to give an excellent fit with its parameter, , depending on the separation between transmitter and receiver. The results of the level crossing rate (LCR) and the average duration of fades (ADFs) confirmed this result. The effect of using reception diversity to improve the quality of the received fading signal was tested. Frequency, space and polaraization diversity were applied and the cross correlation between the envelopes of the received fading signals (magnitude and power) in the diversity branches was evaluated. The diversity gain achieved was also evaluated. The effect of three different combining techniques (selection, equal gain and maximal ratio) and the effect of applying a global or moving means to the recorded data was studied.
منابع مشابه
INDOOR WIDEBAND RADIO PROPAGATION MEASUREMENT SYSTEM AT 1.3 GHz AND 4.0 GHz
This paper describes the development and operation of a dual-band time~domain radar system used to measure indoor multipath propagation characteristics in several office buildings and factories. The system operates at 1.3 GHz and 4.0 GHz, and uses 4 ns rms pulses to provide estimates of indoor radio channel impulse responses. The effects of ante.nna diversity, .frequency scaling, and topography...
متن کاملResults of Indoor Wideband Delay-Azimuth-Elevation Measurements for Stochastic Radio Channel Modeling
The characteristics of the propagation in indoor environments at a carrier frequency of 24 GHz are investigated by means of wideband directional measurements. The data shows that indoor radio propagation is dominated by impinging waves that exhibit discrete character. Furthermore, a global characterization of the investigated radio environment suitable for stochastic channel modeling by means o...
متن کاملکاربرد روش معادله سهموی در تحلیل مسائل انتشار امواج داخل ساختمان
With the rapid growth of indoor wireless communication systems, the need to accurately model radio wave propagation inside the building environments has increased. Many site-specific methods have been proposed for modeling indoor radio channels. Among these methods, the ray tracing algorithm and the finite-difference time domain (FDTD) method are the most popular ones. The ray tracing approach ...
متن کاملMillimeter Wave Propagation Measurements and Modeling in Hospital Environments Thesis Instructor: Title: Millimeter Wave Propagation Measurements and Modeling in Hospital
and Technology aalto university school of science and technology abstract of the master's thesis Applications of wireless technologies in medical treatments have been considered for realizing portable medical equipment and remote monitoring. The 60 GHz band can theoretically oer very high data rates for such applications, but the propagation characteristics of hospital environments have not bee...
متن کاملECE4370 Class Project: Propagation Modeling in Emerging Shared Radio Spectrum at 3.5 GHz
In the United States, government and commercial entities have begun investigating sharing the 3550– 3650 MHz military Radar band. However, proposed exclusion zones that limit the interference to and from these S-band radars would severely restrict the usefulness of this band. The key to ensuring successful sharing is robust interference predictions based on accurate and reliable propagation mod...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- IEEE Trans. Vehicular Technology
دوره 49 شماره
صفحات -
تاریخ انتشار 2000