A Test Method for the Determination of Shear Modulus and Shear Strength
نویسندگان
چکیده
Thi« report presents a method for determining shear modulus and shear strength of unidirectional flber-relnforced composites. The method Incorporates data from unlaxlal tensile and/or oompresslve tests at fiber orientations of 0, 45, and 90 degrees. The approach presented requires fewer specimens for shear strength determinations than current exlstinc procedures. ^ Distribution of this abstract is unlimited.
منابع مشابه
A mathematical model for optimization of strength of concrete: A case study for shear modulus of Rice Husk Ash Concrete
Rice Husk Ash (RHA) is natural Pozzolan containing reactive silica and/or aluminum. When the material is mixed with lime in powdered form and in the presence of water, it will set and harden like cement. This work uses Osadebe’s optimization model to optimize the shear modulus of concrete made from RHA. The strengths predicted by the model are in good agreement with their corresponding experime...
متن کاملThe Validity Assessment of Laboratory Shear Modulus Using In-Situ Seismic Piezocone Test Results
Seismic piezocone device (SCPTu) together with Resonant Column and Cyclic Triaxial test apparatus are employed to measure small strain shear modulus (G0) of carbonate sandy and clayey soils of southern coasts of Iran. A large area of southern regions of Iran is formed from clay, silt and sand. In this study, maximum shear modulus that is derived from both field (by seismic piezocone) and labora...
متن کاملPREDICTING THE STIFFNESS OF BIAXIAL BRAIDED FIBER COMPOSITES BY INCORPORATION OF CARBON NANO FIBER
In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...
متن کاملA model for estimation of stress-dependent deformation modulus of rock mass
Deformation modulus of rock mass has a significant role in the support design of an underground excavation. It is determined by expensive in-situ tests or by empirical models. Existing models for estimation of deformation modulus do not consider its stress dependence. Herein, data from several sources is used to develop a stress- (depth-) dependent relation for estimation of deformation modulus...
متن کاملEffect of Defects on Mechanical Properties of Graphene under Shear Loading Using Molecular Dynamic Simulation
Graphene sheet including single vacancy, double vacancy and Stone-Wales with armchair and zigzag structure was simulated using molecular dynamics simulation. The effect of defects on shear’s modulus, shear strength and fracture strain was investigated. Results showed that these shear properties reduce when the degrees of all kinds of defects increase. The dangling bond in SV and DV defected gr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017