REBIC Analysis of Grain Boundaries in Semi-Insulating and Ceramic Materials
ثبت نشده
چکیده
K E Y W O R D S SEM, electron beam induced current, EBIC, REBIC, grain boundaries, electroceramics,
منابع مشابه
Quenching Effect on the Pb-Substituted Bi-Based Bulk Ceramic Superconductors
The effect of cooling process for the synthesis and the superconductivity properties of Pb-substituted Bi-based materials, has been investigated. The preparation condition for the formation of (2,2,2,3) phase has been examined. The influence of thermal condition of the synthesis and quenching on the critical temperature and the content of 110K phase was investigated. Results of the ac-susceptib...
متن کاملDistribution and Energies of Grain Boundaries in Magnesia as a Function of Five Degrees of Freedom
The multiplicity of distinct grain boundary configurations in polycrystals has made it difficult to determine the relative frequency with which each configuration is adopted, the physiochemical properties of each boundary, and the influence of the distribution of boundaries on macroscopic materials properties. Using a semi-automated system, we have measured all five macroscopically observable d...
متن کاملThe effect of mi ~ rost ~ ~ ture on wear modes of ceramic materials ”
The effect of the microstructure on the wear modes in structural ceramic materials was studied in two SIC and three A120s materials. In each class of materials, it was observed that the predominant damage mode is determined by the microstructure of the material. The materials with weak grain boundaries were found to wear primarily by grain pluckout and so showed more wear than did (the one, cr-...
متن کاملModelling of Grain Growth Kinetics in Porous Ceramic Materials under Normal and Irradiation Conditions
Effect of porosity on grain growth is both the most frequent and technologically important situation encountered in ceramic materials. Generally this effect occurs during sintering, however, for nuclear fuels it also becomes very important under reactor irradiation conditions. In these cases pores and gas bubbles attached to the grain boundaries migrate along with the boundaries, in some circum...
متن کاملObservation of thermally etched grain boundaries with the FIB/TEM technique
Thermal etching is a method which is able to reveal and characterize grain boundaries, twins or dislocation structures and determine parameters such as grain boundary energies, surface diffusivities or study phase transformations in steels, intermetallics or ceramic materials. This method relies on the preferential transfer of matter away from grain boundaries on a polished sample during heatin...
متن کامل