Critical Loads - Classification , Characterization
نویسندگان
چکیده
Computer Architecture) CRITICAL LOADS CLASSIFICATION, CHARACTERIZATION, AND EXPLOITATION
منابع مشابه
Supervisory Control of a Hybrid AC/DC Micro-Grid with Load Shedding Based on the Bankruptcy Problem
In this paper, a supervisory controller is proposed to manage the power flow in a hybrid AC/DC micro-grid for both grid-connected and disconnected modes. When the hybrid AC/DC micro-grid is connected to the utility grid, power surplus or shortage leads to power trade between the micro-grid and the utility grid. In the grid-disconnected mode, the renewable power sources (wind and solar generatio...
متن کاملQuantifying Uncertainty in Critical Loads: (a) Literature Review
Critical loads are the basis for policies controlling emissions of acidic substances in Europe. The implementation of these policies involves large expenditures, and it is reasonable for policymakers to ask what degree of certainty can be attached to the underlying critical load and exceedance estimates. This paper is a literature review of studies which attempt to estimate the uncertainty atta...
متن کاملActive Distribution Networks Restoration after Extreme Events
After extreme events such as floods, thunderstorms, blizzards and hurricanes there will be devastating effects in the distribution networks which may cause a partial or complete blackout. Then, the major concern for the system operators is to restore the maximum critical loads as soon as possible by available generation units. In order to solve this problem, this paper provides a restoration s...
متن کاملBuckling Analysis of FGM Timoshenko Beam with Variable Thickness under Concentrated and Distributed Axial loads Using DQM
In this article, mechanical buckling analysis of tapered beams having constant width and variable thickness, made of two-dimensional functionally graded materials is studied. The beam is assumed to be made of metal and ceramic, where their volume fractions vary in both longitudinal and thickness directions based on the power law. The beam is generally subjected to combined concentrated and dist...
متن کاملThe Evaluation of the Heat Loading from Steady, Transient and Off-normal Conditions in Aries Power Plants*
The heat loading on plasma facing components (PFCs) provides a critical limitation for design and operation of the first wall, divertor, and other special components. Power plants will have high power entering the scrape-off layer and transporting to the first wall and divertor. Although the design for steady heat loads is understood, the approach for transient and off-normal loading is not. Th...
متن کامل