Effect of brand and shade of resin cements on the final color of lithium disilicate ceramic.

نویسندگان

  • Doğu Ömür Dede
  • Gözlem Ceylan
  • Burak Yilmaz
چکیده

STATEMENT OF PROBLEM Resin cements are available in various shades from different manufacturers. However, there is no standard for the optical properties of these cements, which may result in differences in the color of translucent ceramic restorations. PURPOSE The purpose of this in vitro study was to evaluate the effects of different shades and brands of resin cements on the color of a lithium disilicate ceramic. MATERIALS AND METHODS Ten ceramic disks (11×1.5 mm, shade A2) were fabricated from lithium disilicate high-translucency blocks. Eighty cement disks (11×0.2 mm) were fabricated from 4 brands (Maxcem; Variolink; Clearfil; and RelyX) of resin cements in translucent and universal (shade A2) shades. Color measurements of ceramic specimens were made without (control) and with each brand/shade of resin cement material (test) with a spectrophotometer, and International Commission on Illumination Lab (CIELab) color coordinates were recorded. Color differences (ΔE00) between the control and test groups were calculated. ΔE00 results were analyzed by 2-way ANOVA and subsequent pairwise testing. Comparisons were performed using the Student t test, and then all P values were corrected with the step-down Bonferroni procedure (α=.05). RESULTS The effect on the ΔE00 values (P<.001) of the brand and shade of resin cement materials was significant. Both shades of RelyX cement groups had significantly lower and Variolink_translucent cement group had significantly higher ΔE00 results than other brands (P<.05). Only RelyX_translucent and RelyX_universal were significantly different from each other for comparisons within brands (P<.05). The effect of RelyX_universal cement on the ceramic was not visually perceptible (ΔE00≤1.30). Clinically unacceptable results (ΔE00>2.25) were observed only for Variolink_translucent cement (2.36). CONCLUSIONS Same-shade resin cements from different manufacturers had different effects on the color of lithium disilicate ceramic. The effects of different shades of resin cements from the same manufacturer on the color of lithium disilicate ceramic were statistically different for only RelyX, which may also be considered clinically different based on clinical acceptability thresholds for color difference values (ΔE00). Accordingly, this effect may be considered clinically different for Variolink but not clinically different for Maxcem and Clearfil.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effect of Lithium Disilicate Ceramic Thickness and Translucency on Shear Bond Strength of Light-cured Resin Cement

Introduction: To achieve acceptable clinical performance, a ceramic veneer must be bonded to enamel by well-polymerized resin cement. Among different factors, thickness and translucency of the ceramic may affect the resin cement polymerization. Thus, the current study evaluated the effect of the thickness and translucency of lithium disilicate ceramic on light-cured resin cement bond strength t...

متن کامل

Microtensile Bond Strength of Three Restorative Core Materials with IPS e.max Press Ceramic by Two Resin Cements

Objectives: The aim of this study was to compare the microtensile bond strengths (&micro; TBS) of three core materials with one lithium disilicate reinforced ceramic using two resin cements. Methods: Three core materials (Nulite F&reg; (Biodental Technologies), Filtek Z250&reg; (3M-ESPE), Prettau-Anterior&reg; (Zirkonzhan, Germany)) were prepared as blocks (10&times;10&times;4 mm3) according...

متن کامل

Influence of implant abutment material on the color of different ceramic crown systems.

STATEMENT OF PROBLEM Ceramics are widely used for anterior restorations; however, clinical color reproduction still constitutes a challenge particularly when the ceramic crowns are used on titanium implant abutments. PURPOSE The purpose of this in vitro study was to investigate the effect of implant abutment material on the color of different ceramic material systems. MATERIAL AND METHODS F...

متن کامل

A Comparison of Tensile Bond Strength between Low Translucency and High Translucency Lithium Disilicate Ceramics Using Two Different Resin Cements

Objectives: To compare two different dual-curing resins cement interfaces between low translucency and high translucency lithium disilicate glass-ceramics in vitro. M~aterials and Methods: ISO 11405 was modeled by using a standardized dumb-bell test to compare the tensile bond strength of two different resin cement interfaces ofa low translucency lithium disilicate ceramic to a high translucenc...

متن کامل

Silanization effect on microtensile bond strength of a self-adhesive luting material to a disilicate- based glass ceramic

Introduction: The rehabilitation of teeth by means of ceramic indirect restorations has been widely performed. Previous studies has shown the effectiveness of silane coupling agents on improving the bond strength of the adhesion of resin cements to ceramics; however, some studies question the use of silane. Objective: To evaluate the effect of silane application on the microtensile bond strengt...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Journal of prosthetic dentistry

دوره 117 4  شماره 

صفحات  -

تاریخ انتشار 2017