Thienyl-BOPHY dyes as promising templates for bulk heterojunction solar cells.

نویسندگان

  • A Mirloup
  • Q Huaulmé
  • N Leclerc
  • P Lévêque
  • T Heiser
  • P Retailleau
  • R Ziessel
چکیده

The synthesis and characterization of bis(difluoroboryl)-1,2-bis((1H-pyrrol-2-yl)methylene)hydrazone functionalized with two lateral vinyl-thienyl modules and exhibiting strong absorption in the 400-800 nm window in thin films are reported. Bulk heterojunction solar cells assembled with these dyes and a fullerene derivative (PC71BM), using very small quantities of the additive diiodooctane, give a power conversion efficiency as high as 4.3% with short-circuit current values of 10.9 mA cm(-2), an open-circuit voltage of 0.7 V and external quantum efficiencies higher than 70% over a broad range of wavelengths (580 to 720 nm).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Improvement of light harvesting by inserting an optical spacer (ZnO) in polymer bulk heterojunction solar cells: A theoretical and experimental study

By introducing a thin ZnO layer as an optical spacer, we have demonstrated that inserting this layer between an active layer and a reflective electrode results in a re-distribution of the optical electric field inside bulk heterojunction solar cells. A theoretical analysis by optical modeling showed that the thin ZnO layer could shift the position of the maximum of the electric field into the a...

متن کامل

Identifying a Threshold Impurity Level for Organic Solar Cells: Enhanced FirstOrder Recombination Via WellDefined PC84BM Traps in Organic Bulk Heterojunction Solar Cells

Small amounts of impurity, even one part in one thousand, in polymer bulk heterojunction solar cells can alter the electronic properties of the device, including reducing the open circuit voltage, the short circuit current and the fi ll factor. Steady state studies show a dramatic increase in the trap-assisted recombination rate when [6,6]-phenyl C 84 butyric acid methyl ester (PC 84 BM) is int...

متن کامل

High Efficiencies in Nanoscale Poly(3-‎Hexylthiophene)/Fullerene Solar Cells

   A modified morphology was introduced for poly(3-hexylthiophene):phenyl-C71-butyric acid methyl ester (P3HT:PC71BM) bulk heterojunction (BHJ) solar cells by thermal and solvent annealing treatments in the presence of hydrophilic-hydrophobic block copolymers. Power conversion efficiency (PCE) plummet was prohibited during both thermal and solvent treatments for all BHJ devices modified wit...

متن کامل

Control over Power Conversion Efficiency of BHJ Solar Cells: Learn more from Less, with Artificial Intelligence

Harvesting the energy from the sun through the bulk heterojunction (BHJ) solar cells need materials with specific electronic characteristics. However, any promising material if cast improperly in cells will end into low or even null power conversion efficiency (PCE). Cell casting optimization is a time/material consumable step in any photovoltaic manufacturing practice. In this study, we sh...

متن کامل

On the use of cyanine dyes as low-bandgap materials in bulk heterojunction photovoltaic devices

Cyanine dyes with absorption edges of almost 1000 nm were used in combination with MEH-PPV for the fabrication of organic solar cells. For blended thin films, a pronounced phase separation between the two components occurred and resulted in photocurrents with different signs for bilayer and bulk heterojunction devices. Absorption spectra and selective dissolution experiments were used to illust...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Chemical communications

دوره 51 79  شماره 

صفحات  -

تاریخ انتشار 2015