Finite element modal analysis of a rotating disk–spindle system in a HDD with hydrodynamic bearings considering the flexibility of a complicated supporting structure

Abstract This paper presents a method to analyze the free vibration of a rotating disk–spindle system in a HDD with hydrodynamic bearings (HDBs) considering the flexibility of a complicated base structure by using finite element method. Finite element equations of each component of a HDD spindle system from the spinning flexible disk to the flexible base plate are consistently derived by satisfying the geometric compatibility in the internal boundary between each component. The rigid link constraints are also imposed at the interface area between the sleeve and hydrodynamic bearings to describe the physical motion at this interface. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by solving the associated eigenvalue problem by using the restarted Arnoldi iteration method. The validity of the proposed method is verified by comparing the calculated damped natural frequencies and modes with the experimental results. This research also shows that the supporting structure which includes the stator, housing and base plate plays an important role in determining the natural frequencies and mode shapes of a HDD spindle system