Submicroscale Flow Sensor Employing Suspended Hot Film with Carbon Nanotube Fins
نویسندگان
چکیده
A submicroscale flow sensor has been developed that consists of a suspended hot film and carbon nanotube (CNT) fins. Flow measurement experiments, together with a theoretical model, revealed the advantages of the use of CNT fins. The suspended metal film reduces heat loss and the CNT fins enhance the heat transfer to the fluid flow. Herein, the working principle of the CNT fins is presented in detail, together with a description of the micro electro mechanical systems (MEMS) / nano electro mechanical systems (NEMS) techniques used to fabricate the sensor. The CNTs were deposited by a manipulation method that is based on dielectrophoresis.
منابع مشابه
Suspended single-walled carbon nanotube fluidic sensors.
In this paper, we demonstrate the fabrication of liquid flow sensors employing partially suspended single-walled carbon nanotubes (SWNTs). We have found that the sign of the conductance change in SWNT flow sensors is not influenced by the direction of water flow for both supported and suspended devices. Therefore, the streaming potential is not the principal mechanism of the SWNT sensor respons...
متن کاملExperimental Study on Interfacial Thermal Transport of Multi-Walled Carbon Nanotube
Interfacial thermal transport of multi-walled carbon nanotube is explored by using T-type sensor. Reliable signals of heat flow through an individual nanotube were obtained. Estimated thermal boundary resistances between the end of CNT and solid surfaces do not show the clear dependency on material that has been predicted by the diffuse mismatch model treating graphite. This discrepancy is main...
متن کاملIntegrated single-walled carbon nanotube/microfluidic devices for the study of the sensing mechanism of nanotube sensors.
A method to fabricate integrated single-walled carbon nanotube/microfluidic devices was developed. This simple process could be used to directly prepare nanotube thin film transistors within the microfluidic channel and to register SWNT devices with the microfludic channel without the need of an additional alignment step. The microfluidic device was designed to have several inlets that deliver ...
متن کاملKinetic investigation of carbon nanotube deposition by DC electrophoretic technique
In this paper, kinetics of DC electrophoretic deposition EPD of carbon nanotubes CNTs is investigated. Carbon nanotubes suspended in pure ethanol with addition of magnesium nitrate was used as deposition media. The effect of main EPD parameters such as deposition time, applied voltage and the CNT concentration on deposit yield was investigated. The variation of current density vs. time and the ...
متن کاملFlexural strain sensing using carbon nanotube film
Strain sensing characteristic of carbon nanotubes has been established in the past at nanoscale. In this study, it is shown that the carbon nanotube film sensors, made up of randomly oriented carbon nanotubes, can be used as strain sensors at macro level. A nearly linear trend between the change in voltage, measured using a movable four point probe, and strains, measured using conventional elec...
متن کامل