Design Review of a Compact and Low Cost Elementary Radiating Cell for Satellite Broadcasting Automotive Receiving Arrays
نویسندگان
چکیده
This communication presents a review of the developments carried out towards the electromagnetic modeling, design and practical implementation of the basic building block of a planar antenna for the reception of Ku-band satellite broadcasting services from user terminals on board automotive platforms. The antenna is conceived as a low profile phased array with fully electronic beam steering and polarization tracking capabilities. This phased array is intended to address the market of low cost consumer applications, which imposes stringent structural and performance-toprice ratio requirements. As will be shown next, these demanding requirements are going to drive the design of the array basic building block: the so-called Elementary Radiating Cell (ERC).
منابع مشابه
A Small Printed Quadrifilar Helical Antenna for BGAN/GPS Applications
This paper presents an element of a 2×2-element array antenna for Inmarsat BGAN/GPS applications. The element is an axial mode printed quadrifilar helical antenna that has been integrated with a compact feed network to provide sequential phase rotation for circular polarization (CP) radiation. The novel integrated lumped-element feed network is designed to provide a balanced RF power to the fou...
متن کاملNovel Fractal Antenna Arrays for Satellite Networks: Circular Ring Sierpinski Carpet Arrays Optimized by Genetic Algorithms
A novel fractal antenna-array type is proposed. The design is based on the Sierpinski rectangular carpet concept. However, the generator is a circular ring area, filled with radiating elements, so the higher stages of the fractal development produce large arrays of circular rings which, besides the high directivity, have the advantage of the almost uniform azimuthal radiation pattern, attribute...
متن کاملDesign Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays
In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...
متن کاملA high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material
In this paper we report on a lithium ion battery (LIB) based on improved olivine lithium iron phosphate/carbon (LiFePO4/C) as cathode material and LiNa0.02K0.01FePO4/C synthesized by sol-gel method and TiO2 nanotube arrays (TNAs) with an anatase phasesynthesized through anodization of Ti foil as an anode electrode. Crystallographic structure and surface morphology of the cathode and anode mate...
متن کاملNormal and Parallel Permeability of Preform Composite Materials used in Liquid Molding Processes: Analytical Solution
The permeability of the preform composite materials used in liquid molding processes such as resin transfer molding and structural reaction injection molding is a complex function of weave pattern and packing characteristics. The development of tools for predicting permeability as a function of these parameters is of great industrial importance. Such capability would speed process design and op...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011