Characteristics and in vitro response of thin hydroxyapatite–titania films produced by plasma electrolytic oxidation of Ti alloys in electrolytes with particle additions
نویسندگان
چکیده
The enhancement of the biological properties of Ti by surface doping with hydroxyapatite (HA) is of great significance, especially for orthodontic applications. This study addressed the effects of HA particle size in the electrolyte suspension on the characteristics and biological properties of thin titania-based coatings produced on Ti-6Al-4V alloy by plasma electrolytic oxidation (PEO). Detailed morphological investigation of the coatings formed by a single-stage PEO process with two-step control of the electrical parameters was performed using the Minkowski functionals approach. The surface chemistry was studied by glow discharge optical emission spectroscopy and Fourier transform infrared spectroscopy, whereas mechanical properties were evaluated using scratch tests. The biological assessment included in vitro evaluation of the coating bioactivity in simulated body fluid (SBF) as well as studies of spreading, proliferation and osteoblastic differentiation of MC3T3-E1 cells. The results demonstrated that both HA micro- and nanoparticles were successfully incorporated in the coatings but had different effects on their surface morphology and elemental distributions. The micro-particles formed an irregular surface morphology featuring interpenetrated networks of fine pores and coating material, whereas the nanoparticles penetrated deeper into the coating matrix which retained major morphological features of the porous TiO2 coating. All coatings suffered cohesive failure in scratch tests, but no adhesive failure was observed; moreover doping with HA increased the coating scratch resistance. In vitro tests in SBF revealed enhanced bioactivity of both HA-doped PEO coatings; furthermore, the cell proliferation/morphometric tests showed their good biocompatibility. Fluorescence microscopy revealed a well-organised actin cytoskeleton and focal adhesions in MC3T3-E1 cells cultivated on these substrates. The cell alkaline phosphatase activity in the presence of ascorbic acid and β-glycerophosphate was significantly increased, especially in HA nanoparticle-doped coatings.
منابع مشابه
Investigation of the effect of electrolyte on acoustical behaviour of ceramic coatings produced by method Plasma Electrolytic Oxidation (PEO) on titanium
In this paper, titanium oxide coating (TiO2) was produced on titanium alloy Ti6Al4V by Plasma Electrolytic Oxidation (PEO) Method. Sodium Silicate (Na2SiO3) and Sodium Aluminate (NaAlO2) based electrolytes were selected in PEO process. The effects of concentration of Sodium Aluminate (0, 2.5, 5, 7.5, and 10 g/L) on the microstructure and acoustical behaviour of the formed coatings were studied....
متن کاملCharacterization of Oxide Film Formed on Ck45 Steel by Plasma Electrolytic Oxidation Method
Plasma electrolytic oxidation (PEO) is the new, environmentally and cost-effective method for coating the metals. This method vastly has been studied for coating Aluminum, Titanium and Magnesium and their alloys and recently for steel. In present study, Ck45 steel samples were coated by PEO method in order to improve corrosion resistance. During this process specimens were immerged in carbonate...
متن کاملEffect of coating time on the corrosion behavior of ceramic coatings containing hydroxyapatite nanoparticles by plasma electrolytic oxidation method on AZ31 Mg alloy in simulated body fluid
In this study, the effect of coating time on the microstructure and corrosion behavior of AZ31 Mg alloy coated by plasma electrolytic oxidation (PEO) method has been investigated. For this purpose, phosphate-based electrolyte containing hydroxyapatite nanoparticles was used at different times of 5, 10 and 15 minutes. The surface properties and chemical composition of the coatings were investiga...
متن کاملEffect of KOH concentration on the microstructure and electrochemical behavior of ceramic coatings formed by plasma electrolytic oxidation method on AZ31B Mg alloy
In this study, ceramic coatings were prepared on AZ31B Mg alloy by plasma electrolytic oxidation technique in electrolytes containing sodium fluoride (KF), sodium silicate (Na2SiO3.5H2O) and different potassium hydroxide (KOH) concentrations. The electrochemical behavior of AZ31B alloy and plasma electrolytic oxidation coatings was studied by potentiodynamic polarization, electrochemical impeda...
متن کاملThe Effect of thickness parameter and Fluorine Dopant on Photocatalytic performance of TiO2 thin films
In this study, Pure and doped titania sols with Fluorine (F/Ti:0.06) dopant, were prepared by sol-gel method and Ammonium Fluoride(NH4F) as the precursor. They were deposited on glass substrates (soda lime) in a certain(optimum) nanometric thickness by the dip coating method. Coated samples were dried and calcined under the specific rate. Phase composition and optical properties of coatings wer...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 6 شماره
صفحات -
تاریخ انتشار 2016