Designing Coatings in the Presence of Manufacturing Errors
نویسندگان
چکیده
A novel robust optimization algorithm is demonstrated, which attempts to account for expected coating errors. Monte Carlo simulations show the robust approach improves manufacturing yields relative to conventional optimization. c © 2010 Optical Society of America OCIS codes: (310.6805) Theory and design; (310.4165) Multilayer design
منابع مشابه
Preparation of Ultra Dispersive Glasses for Designing Novel Coatings
In order to attain glasses with ultra dispersions properties, different heavy metal oxides were used. The desired glasses were obtained from the addition of high amounts of PbO and Bi2O3 to B2O3 based glasses. Refractive index measurements were carried out accurately at different wavelengths by the minimum angle of deviation in prisms method employing a spectrometer. Results indicated that, as ...
متن کاملIR-reflective Opaque Water-based Acrylic Coatings on White Pine Wood Substrates
Two sets of opaque water-based acrylic coatings were prepared with IR-reflective pigments and conventional pigments. The objective of this work was to determine the efficiency of IR-reflective pigments in limiting the heat buildup of opaque coating formulations. Experiments performed on PVC substrates revealed that IR-reflective pigments significantly decreased the temperature increase above ro...
متن کاملDesigning and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow
Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...
متن کاملDesigning and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow
Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...
متن کاملTiO2 nano-particle effect on the chemical and physical properties of Ni-P-TiO2 nanocomposite electroless coatings
TiO2 nano-particles were used in electroless plating bath to obtain Ni/P/nano-composite coatings. The coatings were heat treated at 200, 400, 600 and 700 oC and their chemical and physical properties were investigated and it was found that 400 oC was the optimum temperature for the heat treatment of the coatings. The micro-hardness test of coatings showed that t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010