2.1-channel high-efficiency digital audio system Sound Terminal®
ثبت نشده
چکیده
Wide-range supply voltage – 5 V to 26 V (operating range) – 30 V (absolute maximum rating) Four power output configurations – 2 channels of ternary PWM (stereo mode) (2 x 30 W into 8 at 22 V) – 3 channels left, right using binary and LFE using ternary PWM (2.1 mode) (2 x 15 W + 1 x 30 W into 2 x 4, 1 x 8 at 22 V) – 2 channels of ternary PWM (2 x 30 W) + stereo lineout ternary) FFX®100 dB SNR and dynamic range Selectable 32 to 192 kHz input sampling rates I2C control with selectable device address Digital gain/attenuation +42 dB to -80 dB with 0.125 dB/step resolution Soft-volume update with programmable ratio Individual channel and master gain/attenuation Two independent DRCs configurable as a dual-band anti-clipper (B2DRC) or independent limiters/compressors EQ-DRC for DRC based on filtered signals Dedicated LFE processing for bass boosting with 0.125 dB/step resolution Audio presets: – 15 preset crossover filters – 5 preset anti-clipping modes – Preset nighttime listening mode Individual channel and master soft/hard mute Independent channel volume and DSP bypass Automatic zero-detect mute Automatic invalid input-detect mute I2S input data interface Input and output channel mapping Up to 8 user-programmable biquads per channel 3 coefficient banks for EQ presets storing with fast recall via I2C interface Extended coefficient dynamic up to -4..4 for easy implementation of high shelf filters Bass/treble tones and de-emphasis control Selectable high-pass filter for DC blocking Advanced AM interference frequency switching and noise suppression modes Selectable highor low-bandwidth noise-shaping topologies Selectable clock input ratio 96 kHz internal processing sampling rate with quantization error noise shaping for very low cutoff frequency filters Thermal overload and short-circuit protection embedded Video apps: 576 x Fs input mode supported Fully compatible with STA339BW, STA369BWS and STA350BW PowerSSO-36 with exposed pad down (EPD)
منابع مشابه
Audio Processing Chain Recommendation Using Semantic Cues
Sound engineers typically allocate audio effects to a channel strip in series. This allows the engineer to perform a complex set of operations to fine-tune different tracks in a mixing or mastering environment. In this research, trends in plugin chain selection are investigated, focusing on transformations which modify the timbral characteristics of a sound. Using this information, a recommenda...
متن کاملDigital Audio Bit-rate Reduction for Broadcasting
The bit rate of a single channel of high-quality digital audio may now be reduced by up to 90% using so-called 'perceptual coding systems' with minimal effects on sound quality. Such systems form the basis of proposals for digital audio broadcasting (DAB), this being the subject of the Eureka 147 programme, and they offer the possibility for extending the storage times available from digital re...
متن کاملHigh-definition digital audio in 3-dimensional sound reproduction
The principles of high-definition, S-dimensional digital audio are reviewed as applicable to DVD in terms of PCM and bitstream formats. A case is presented in favour of both extended dynamic range and extended bandwidth and methods of implementation discussed. Lossless compression is also supported together with multi-channel encoding, while aspects relevant to converter parameters and band-lim...
متن کاملPower Reduction in the Transmitting Amplifier of OFDM System by Reducing its Peak to Average Power Ratio (PAPR) and Adaptive Modulations Techniques
Efficiency of Orthogonal Frequency-Division Multiplexing (OFDM) system is improved by reducing the power consumed by its transmitter and also by improving the spectral efficiency. Power usage is reduced by reducing the PAPR of OFDM system and spectral efficiency is improved by Adaptive modulation and coding schemes (AMC). In OFDM system, transmission signals can have high peak values in the tim...
متن کاملA Digital Watermark for Stereo Audio Signals Using Variable Inter-channel Delay in High-frequency Bands and Its Evaluation
We propose a watermarking algorithm for stereo audio signals which embeds data using delay values of the high-frequency channel signals. Since the stereo image perception of the human auditory system is known to be relatively insensitive to phase in the high-frequency region, we replace the two high-frequency channel signals with one middle channel signal, and embed data as the delay between th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013