A Novel Predictive Digital Controlled Sensorless PFC Converter under the Boundary Conduction Mode
نویسندگان
چکیده
This paper presents a novel predictive digital control method for boundary conduction mode PFC converters without the need for detecting the inductor current. In the proposed method, the inductor current is predicted by analytical equations instead of being detected by a sensing-resistor. The predicted zero-crossing point of the inductor current is determined by the values of the input voltage, output voltage and predicted inductor current. Importantly, the prediction of zero-crossing point is achieved in just a single switching cycle. Therefore, the errors in predictive calculation caused by parameter variations can be compensated. The prediction of the zero-crossing point with the proposed method has been shown to have good accuracy. The proposed method also shows high stability towards variations in both the inductance and output power. Experimental results demonstrate the effectiveness of the proposed predictive digital control method for PFC converters.
منابع مشابه
Voltage Regulation of DC-DC Series Resonant Converter Operating in Discontinuous Conduction Mode: The Hybrid Control Approach
Dynamic modeling and control of dc-dc series resonant converter (SRC) especially when operating in discontinuous conduction mode (DCM) is still a challenge in power electronics. Due to semiconductors switching, SRC is naturally represented as a switched linear system, a class of hybrid systems. Nevertheless, the hybrid nature of the SRC is commonly neglected and it is modeled as a purely contin...
متن کاملSimulation of Closed Loop Controlled Bridgeless Pfc Boost Converter
Conventional boost PFC converter suffers from the high conduction loss in the input rectifier-bridge. Higher efficiency can be achieved by using the bridgeless boost topology. In this paper, digital simulation of bridgeless PFC boost rectifiers, also called dual boost PFC rectifiers, is presented. Performance comparison between the conventional PFC boost rectifier and the bridgeless PFC boost r...
متن کاملSliding-Mode Control of the DC-DC Ćuk Converter in Discontinuous Conduction Mode
In this paper, a novel approach for two-loop control of the DC-DC Ćuk converter in discontinuousconduction mode is presented using a sliding mode controller. The proposed controller can regulatethe output of the converter in a wide range of input voltage and load resistance. Controllerparameters are selected using PSO algorithms. In order to verify the accuracy and efficiency of thedeveloped sl...
متن کاملDesign Guideline of Single-Stage Flyback AC-DC Converter Using FAN7530 for LED Lighting
This application note describes the single-stage power factor correction (PFC) and presents the design guidelines of a 75W universal-input, single-stage PFC for LED lighting applications. Flyback converter topology controlled by the critical conduction mode control IC, FAN7530 is applied and several functions; such as CV/CC mode feedback circuits, cycle-by-cycle current limit, soft-starting fun...
متن کاملAN-8027 — FAN480X PFC+PWM Combination Controller Application
This application note describes step-by-step design considerations for a power supply using the FAN480X controller. The FAN480X combines a PFC controller and a PWM controller. The PFC controller employs average current mode control for Continuous Conduction Mode (CCM) boost converter in the front end. The PWM controller can be used in either current mode or voltage mode for the downstream conve...
متن کامل