Bi-directional optical backplane bus for general purpose multi-processor board-to-board optoelectron - Lightwave Technology, Journal of

نویسندگان

  • Srikanth Natarajan
  • Chunhe Zhao
چکیده

AbsfractWe report for the first time a bidirectional optical backplane bus for a high performance system containing nine multi-chip module (MCM) boards, operating at 632.8 and 1300 nm. The backplane bus reported here employs arrays of multiplexed polymer-based waveguide holograms in conjunction with a waveguiding plate, within which 16 substrate guided waves for 72 (8 x 9) cascaded fanouts, are generated. Data transfer of 1.2 GbUs at 1.3-pm wavelength is demonstrated for a single bus line with 72 cascaded fanouts. Packaging-related issues such as transceiver size and misalignment are embarked upon to provide a reliable system with a wide bandwidth coverage. Theoretical treatment to minimize intensity fluctuations among the nine modules in both directions is further presented and an optimum design rule is provided. The backplane bus demonstrated, is for general-purpose and therefore compatible with such IEEE standardized buses as VMEbus, Futurebus and FASTBUS, and can function as a backplane bus in existing computing environments.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Y-Junction based addressing in Optical Symmetric Multiprocessor Networks

1. Introduction In a symmetric multiprocessor (SMP), every processor has its own cache, and all the processors and memory modules are connected to the central interconnect, which is usually a shared bus. As the processors become faster, the central interconnect architecture of traditional SMP's impedes performance because it cannot keep up with the processors capabilities. As SMP's have hardwar...

متن کامل

Polymer optical waveguide based bi-directional optical bus architecture for high speed optical backplane

With the technology trend of using optical interconnects as an alternative to traditional copper interconnects, basic elements such as waveguides and waveguide bus structure are studied worldwide. A novel 3-node bi-directional 50μm optical waveguide bus architecture with embedded mirrors is proposed and fabricated on flexible substrate. The fabrication is achieved by lithography-free molding. D...

متن کامل

A Strong Partitioning Protocol for VME-based Systems Integration

This paper describes a new technology that can provide a global VME memory management in supporting the need of strong partitioning among multi-processor applications on the VME backplane. The technology allows each VME board to maintain a fault containment region on board level and prohibit fault propagation through the bus. The described techniques do not require any modification in the stand...

متن کامل

Photolithography-free polymer optical waveguide arrays for optical backplane bus.

In this paper, an innovative 3-to-3 bi-directional optical bus architecture based on multimode polymer waveguides with embedded 45° micro-mirrors was successfully demonstrated. With a lithography-free imprinting process by high quality electroplated metallic mold, the device can be precisely replicated with a low fabrication cost. Superior to any point-to-point optical waveguide, the implemente...

متن کامل

Multi-perspective Decision Support System for Hierarchical Bus Transportation Network Design‎: ‎Tehran Case Study

In this paper, a multi-perspective decision support system (MP-DSS)‎ ‎to design hierarchical public transportation network is developed‎. ‎Since this problem depends on different perspectives‎, ‎MP-DSS consists of two sub-systems with macro and micro sub-systems based on travel information‎, ‎land use and expert knowledge‎. ‎In the micro sub-system‎, ‎two sub-modules are developed considering o...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004