Morphology of polymer/fullerene bulk heterojunction solar cells
نویسندگان
چکیده
Within the different organic photovoltaic devices the conjugated polymer/fullerene bulk heterojunction approach is one of the foci of today’s research interest. These devices are highly dependent on the solid state nanoscale morphology of the two components (donor/acceptor) in the photoactive layer. The need for finely phase separated polymer–fullerene blends is expressed by the limited exciton diffusion length present in organic semiconductors. Typical distances that these photo-excitations can travel within a pristine material are around 10–20 nm. In an efficient bulk heterojunction the scale of phase separation is therefore closely related to the respective exciton diffusion lengths of the two materials involved. Once the excitons reach the donor/ acceptor interface, the photoinduced charge transfer results in the charge separation. After the charges have been separated they require percolated pathways to the respective charge extracting electrodes in order to supply an external direct current. Thus also an effective charge transport relies on the development of a suitable nanomorphology i.e. bicontinuous interpenetrating phase structures within these blend films. The present feature article combines and summarizes the experimental findings on this nanomorphology–efficiency relationship.
منابع مشابه
High Efficiencies in Nanoscale Poly(3-Hexylthiophene)/Fullerene Solar Cells
A modified morphology was introduced for poly(3-hexylthiophene):phenyl-C71-butyric acid methyl ester (P3HT:PC71BM) bulk heterojunction (BHJ) solar cells by thermal and solvent annealing treatments in the presence of hydrophilic-hydrophobic block copolymers. Power conversion efficiency (PCE) plummet was prohibited during both thermal and solvent treatments for all BHJ devices modified wit...
متن کاملBimolecular Crystals of Fullerenes in Conjugated Polymers and the Implications of Molecular Mixing for Solar Cells
Organic photovoltaics have recently attracted tremendous attention in industry and academia since they offer the potential to significantly change energy production by drastically reducing the manufacturing cost for solar cells. Organic materials are flexible, lightweight and can be fabricated over large areas via low cost solution-based processing technologies. The most common solar cell imple...
متن کاملImprovement of light harvesting by inserting an optical spacer (ZnO) in polymer bulk heterojunction solar cells: A theoretical and experimental study
By introducing a thin ZnO layer as an optical spacer, we have demonstrated that inserting this layer between an active layer and a reflective electrode results in a re-distribution of the optical electric field inside bulk heterojunction solar cells. A theoretical analysis by optical modeling showed that the thin ZnO layer could shift the position of the maximum of the electric field into the a...
متن کاملStudies of Charge Transport and Energy Level in Solar Cells Based on Polymer/Fullerene Bulk Heterojunction
متن کامل
Determining the optimum morphology in high-performance polymer-fullerene organic photovoltaic cells
The morphology of bulk heterojunction organic photovoltaic cells controls many of the performance characteristics of devices. However, measuring this morphology is challenging because of the small length-scales and low contrast between organic materials. Here we use nanoscale photocurrent mapping, ultrafast fluorescence and exciton diffusion to observe the detailed morphology of a high-performa...
متن کامل