Koffka's effect is mediated by figure thickness at the joining region.
نویسندگان
چکیده
Three-quarters of a century ago Gestalt psychologist Kurt Koffka described a remarkable effect: when a contiguous gray ring is placed on a background half one shade of gray, half another, the ring appears homogeneous. However, if the ring is divided, the two halves of the ring appear different shades of gray, the half of the ring on the darker background appearing lighter than the half of the ring on the lighter background. The Gestalt principle of continuity is used to explain this effect. But what microscopic principles might be mediating this effect? Recently we found sufficiently thin rings (annuli) appear heterogeneous even when geometrically continuous. Here, using crescent-shaped figures instead of the circular annuli used for the traditional Koffka effect, we show that this effect of thickness of the ring is mediated by the thickness at the boundary of the region where the halves of the figure are joined.
منابع مشابه
Atomic diffusion modeling and Investigation of joining properties of TLP in AA2024 to AA6061 alloys
In this study, to bond AA2024 and AA6061 alloys to each other, three elements (Sn, Zn and Ga) were considered as interlayer elements in terms of atomic diffusion depth in the base metal and storage at 453°C for 2 days, 10 hours, 210 minutes, and 30 seconds that they were examined for atomic diffusion modeling. Finally, the two alloys were connected at a temperature of 453°C in a furnace enviro...
متن کاملAtomic diffusion modeling and Investigation of joining properties of TLP in AA2024 to AA6061 alloys
In this study, to bond AA2024 and AA6061 alloys to each other, three elements (Sn, Zn and Ga) were considered as interlayer elements in terms of atomic diffusion depth in the base metal and storage at 453°C for 2 days, 10 hours, 210 minutes, and 30 seconds that they were examined for atomic diffusion modeling. Finally, the two alloys were connected at a temperature of 453°C in a furnace enviro...
متن کاملJoining of the 5083 aluminum alloy using the bobbin tool friction stir welding technique
Conventional fusion welding of aluminum alloys results in coarse-grained structure, inevitable defects, and significant softening in the welding region. Friction stir welding with bobbin tool is a technique of friction stir welding method that has a great potential for developing applications of friction stir welding method in marine, aerospace, and automotive industries due to having an extra ...
متن کاملJoining of the 5083 aluminum alloy using the bobbin tool friction stir welding technique
Conventional fusion welding of aluminum alloys results in coarse-grained structure, inevitable defects, and significant softening in the welding region. Friction stir welding with bobbin tool is a technique of friction stir welding method that has a great potential for developing applications of friction stir welding method in marine, aerospace, and automotive industries due to having an extra ...
متن کاملEffect of Welding Heat Input on the Intermetallic Compound Layer and Mechanical Properties in Arc Welding-brazing Dissimilar Joining of Aluminum Alloy to Galvanized Steel
The effect of weld heat input on the formation of intermetallic compound (IMCs) layer during arc welding–brazing of aluminium and steel dissimilar alloys, was investigated through both finite element method (FEM) numerical simulations and experimental measurements. The results of FEM analysis as well as welding experiments indicated that increasing weld heat input increases the thickness of IMC...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Perception
دوره 40 9 شماره
صفحات -
تاریخ انتشار 2011