Porous Fiber Formation in Polymer-Solvent System Undergoing Solvent Evaporation
نویسندگان
چکیده
منابع مشابه
Development of a simultaneous measurement system for SAXS-WAXD and the thickness of coating films during film formation by solvent evaporation
A system for the simultaneous measurement of small-angle X-ray scattering and wide-angle X-ray diffraction (SAXS–WAXD) and the thickness of a coating film, obtained with an automatic coater, during film formation has been developed. The system was installed on beamline BL03XU at SPring-8. As model specimens, poly(methyl methacrylate)-b-poly(n-butyl acrylate)-b-poly(methyl methacrylate) (PMMA-b-...
متن کاملFormation of organic nanoparticles by solvent evaporation within porous polymeric materials.
A simple and generic method is developed to form organic nanoparticles in porous materials by solvent evaporation. The composites can be readily dissolved in water to produce aqueous organic nanoparticle dispersions.
متن کاملSimulations of Polymeric Membrane Formation in 2D and 3D
The immersion precipitation process makes most commercial polymeric membranes, which enjoy widespread use in water filtration and purification. In this work, a ternary Cahn-Hilliard formulation incorporating a Flory-Huggins homogeneous free energy function is used to model both initial diffusion and the liquid-liquid demixing stage of the immersion precipitation process, which determines much o...
متن کاملFiber average size and distribution dependence on the electrospinning parameters of poly(vinylidene fluoride trifluoroethylene)) membranes for biomedical applications
Poly(vinylidene fluoride-trifluoethylene), P(VDF-TrFE), electrospun membranes were obtained from a mixture of dimethylformamide (DMF) and methylethylketone (MEK) solvents. The inclusion of MEK to the solvent system promotes a faster solvent evaporation allowing complete polymer crystallization during the jet travelling between the tip and the grounded collector. The main electrospinning process...
متن کاملSolvent effects on the microstructure and properties of 75/25 poly(D,L-lactide-co-glycolide) tissue scaffolds.
Poly(lactide-co-glycolide) (PLGA) is used in many biomedical applications because it is biodegradable, biocompatible, and FDA approved. PLGA can also be processed into porous tissue scaffolds, often through the use of organic solvents. A static light scattering experiment showed that 75/25 PLGA is well solvated in acetone and methylene chloride, but forms aggregates in chloroform. This led to a...
متن کامل