Development of a Finite Element-Based Hall-Thruster Model

نویسندگان

  • Subrata Roy
  • B. P. Pandey
چکیده

This paper aims to characterize the Hall-thruster plasmadynamics in the framework of multi uidmodel. Effect of the ionization and the recombination has been included in the present model. Based on the experimental data, a third-order polynomial in electron temperature is used to calculate the ionization rate. The neutral dynamics is included only through the neutral continuity equation in the presence of a uniform neutral  ow. The electrons are modeled as magnetized and hot, whereas ions are assumed unmagnetized and cold. The computed plasma density proŽ le shows that the location of the density maximum is shifted slightly inward from the channel exit. This suggests that the maximum ionization takes place inside the channel. This is in conformity with the experimental observations. The maximum electron temperature increase takes place just near the exit closer to the inner wall. This is consistent with the electron gyration velocity distribution. The plasma potential is fairly  at in most parts of the channel before falling at the exit. Simulation results are interpreted in the light of experimental observations and available numerical solutions in the literature.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Development of a Finite Element Based Hall Thruster Model for Sputter Yield Prediction

* Presented as Paper IEPC-01-49 at the 27 International Electric Propulsion Conference, Pasadena, CA, 15-19 October, 2001. † Copyright © 2001 by the authors. Published by the Electric Rocket Propulsion Society with permission. Modeling the Hall thruster for sputter yield prediction is of considerable interest to the electric propulsion community. This paper documents the status of a finite elem...

متن کامل

Single-fluid MHD model of current-free plasma thrusters with static magnetic fields

ONERA is involved in the testing and development of new current-free electric thruster (helicon thruster or ECR thruster), using magnetized plasmas. For this development, a numerical tool is desirable to model the magnetized plasma, and assess the overall performances of the system. For this reason, a model for the plasma produced in the thruster has been developed. It boils down to a single-fl...

متن کامل

Finite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials

Nanocrystalline materials show a higher strain-rate sensitivity in contrast to the conventional coarse-grained materials and a different grain size dependency. To explain these phenomenon, a finite element model is constructed that considers both grain interior and grain boundary deformation of nanocrystalline materials. The model consist of several crystalline cores with different orientations...

متن کامل

Numerical investigation of a Hall thruster plasma

The dynamics of the Hall thruster is investigated numerically in the framework of a one-dimensional, multifluid macroscopic description of a partially ionized xenon plasma using finite element formulation. The model includes neutral dynamics, inelastic processes, and plasma–wall interaction. Owing to disparate temporal scales, ions and neutrals have been described by set of time-dependent equat...

متن کامل

Ion Thruster Grid Lifetime Assessment Based on Its Structural Failure

This article developed an ion thruster optic system sputter erosion depth numerical 3D model by IFE-PIC (Immersed Finite Element-Particle-in-Cell) and Mont Carlo method, and calculated the downstream surface sputter erosion rate of accelerator grid; compared with LIPS-200 life test data. The results of the numerical model are in reasonable agreement with the measured data. Finally, we predicted...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003