A State Space Modeling of Non-Isolated Bidirectional DC-DC Converter with Active Switch
نویسندگان
چکیده
In this paper, analysis, design and implementation of non-isolated soft-switching bidirectional DCDC converter with an active switch are described. The proposed topology gives the output voltage as twice as the input voltage and enhances the efficiency up to 94.5% and 92.9% for boost and buck mode operation by proper selection of the duty cycle. Soft switching can be achieved at both steps up and step down operating modes. Small signal analysis based on state space averaging and transfer functions have been presented in detail for the proposed converter. Finally, the feasibility of the desired converter is confirmed to mat lab simulation and investigational results.
منابع مشابه
Analysis and Design of a New Single Switch Non-Isolated Buck-Boost dc-dc Converter
In this paper, a new transformerless buck-boost converter based on ZETA converter is introduced. The proposed converter has the ZETA converter advantages such as, buck-boost capability and input to output DC insulation. The suggested converter voltage gain is higher than the classic ZETA converter. In the presented converter, only one main switch is utilized. The proposed converter offers low v...
متن کاملارائۀ یک مبدل غیر ایزولۀ DC-DC با ضریب افزایندگی بالا برای کاربرد در انرژی خورشیدی
In this paper, a new non-isolated transformerless high step up Dc-Dc converter with low voltage stress on the active switch for solar energy application is proposed. The converter topology is simple, which makes the control scheme simple. In this converter, only one active switch is used which makes reducing the switching power loss. The voltage gain of the proposed converter is higher than the...
متن کاملA Non Isolated Bidirectional Dc-dc Converter with Soft Switching
Power electronic converter systems for applications such as telecom, automotive, and space can have dc voltage buses that are backed up with batteries or super-capacitors. These batteries or super-capacitors are connected to the buses with bidirectional dc–dc converters which allow them to discharged or charged, depending on the operating conditions. Bidirectional dc–dc converters may be isolat...
متن کاملA New ZVZCS Isolated Dual Series Resonant DC-DC Converter with EMC Considerations
A novel ZVZCS isolated dual series-resonant active-clamp dc–dc converter is proposed to obtain high efficiency. The proposed converter employs an active-clamp technique, while a series-resonant scheme controls the output voltage with the complementary pulse width modulation controller. The active-clamp circuit serves to recycle the energy stored in the leakage inductance or the magnetizing ...
متن کاملImplementation of Solar Based Bidirectional Dc-Dc Converter with ZVS using PMDC motor
In this project presents a new non conventional energy source based bidirectional dc/dc converter for transfer the power in both directions. The nonconventional source of solar energy with Maximum Power Point Tracking is used to avoid the demand of electric power, which is inexhaustible and non pollution .The maximum power point traction is the combination of switch mode converter and Controlle...
متن کامل