Fault Diagnosis of Dynamic Systems Reusing Cases
نویسندگان
چکیده
This paper discuss about fault diagnosis (FD) techniques for dynamic systems. Case Based Reasoning (knowledge-based technique) has been applied in the Electrical Systems domain in order to diagnose the origin of voltage faults. In other hand, residual generation (analytical model-based technique) was accomplished using Dynamic Time Warping and a laboratory plant has been used to test this approach.
منابع مشابه
Model-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines
In this paper, the multi-sensor fault diagnosis in the exhaust temperature sensors of a V94.2 heavy duty gas turbine is presented. A Laguerre network-based fuzzy modeling approach is presented to predict the output temperature of the gas turbine for sensor fault diagnosis. Due to the nonlinear dynamics of the gas turbine, in these models the Laguerre filter parts are related to the linear d...
متن کاملEccentricity Fault Diagnosis Studying for a Round Rotor Synchronous Machine
The paper presents a mathematical base modeling combined to Modified-Winding -Function-Approach (MWFA) for eccentricity fault detection of a round-rotor synchronous machine. For this aim, a 6-pole machine is considered, and the machine inductances are computed by MWFA in healthy and also under eccentricity fault. A numerical discrete-time method has been proposed to machine modeling in voltage-...
متن کاملInvestigation of seismic damage index due to water level changes in reservoir through nonlinear dynamic analysis under Far-Fault and Near-Fault ground motions
In this study, reservoir water level effects on nonlinear dynamic response of concrete gravity dams are investigated. For this purpose, the nonlinear behavior of the dam concrete is captured using the concrete damage plasticity (CDP) on the non associated flow rule assumption. Water in the reservoir is represented by the Lagrangian (displacement-based) fluid finite elements. The program ABAQUS ...
متن کاملFault diagnosis in a distillation column using a support vector machine based classifier
Fault diagnosis has always been an essential aspect of control system design. This is necessary due to the growing demand for increased performance and safety of industrial systems is discussed. Support vector machine classifier is a new technique based on statistical learning theory and is designed to reduce structural bias. Support vector machine classification in many applications in v...
متن کاملAn Intensity Measure for Seismic Input Energy Demand of Multi-Degree-of-Freedom Systems
Nonlinear dynamic analyses are performed to compute the maximum relative input energy per unit mass for 21 multi-degree-of-freedom systems (MDOF) with preselected target fundamental periods of vibration ranging from 0.2 to 4.0 s and 6 target inter-story ductility demands of 1, 2, 3, 4, 6, 8 subjected to 40 the earthquake ground motions. The efficiency of the several intensity measures as an ind...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003