ANISOTROPIC SUPERELASTICITY OF TEXTURED Ti-Ni SHEET

نویسنده

  • P. THAMBURAJA
چکیده

A recently developed crystal-mechanics-based constitutive model for polycrystalline shape-memory alloys (Thamburaja and Anand [1]) is shown to quantitatively predict the in-plane anisotropy of superelastic sheet Ti-Ni to reasonable accord. Keywords— Phase transformations, Constitutive equations, Finite-elements, Mechanical testing.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Corrosion of Ni-Ti Rotary Instruments: A Review

The nickel-titanium (Ni-Ti) alloys used in endodontics contain 56% Ni and 44% Ti. The 2 unique features related to clinical dentistry (i.e., shape memory effect and superelasticity) are due to the transition from austenite to martensite in Ni-Ti alloy. When a superelastic Ni-Ti alloy undergoes a low tensile loading, normal elastic behavior occurs. In fact, at higher tensile loads, the elastic s...

متن کامل

Fatigue properties of Ni-43.5%Ti superelastic alloy castings.

To evaluate a Ni-43.5wt%Ti alloy as a new alloy for cast clasp, the fatigue properties of its castings were examined and compared with those of Co-Cr and Type IV Au alloys castings. The Ni-Ti alloy was cast into a phosphate-bonded investment mold using an argon-arc melting and pressure casting machine. The Ni-Ti alloy castings showed superelasticity in bending tests. Fatigue tests were carried ...

متن کامل

Dental casting of superelastic Ni-Ti alloy.

Rods of Ni-43.5wt% Ti alloy were prepared under various casting conditions. Specimens which were melted in a cordierite crucible and cast in a phosphate-bonded investment mold had less strength and elongation than those melted in a copper crucible and cast in a phosphate-bonded investment mold. All castings exhibited superelasticity at room temperature. The upper limit of recoverable strain was...

متن کامل

Structural and Textural Evolution during Cold Work in Ti-Rich Ni-Ti Shape Memory Alloy

The properties and cost have made the Nickel-Titanium (NiTi) shape memory alloys (SMA) attractive for a variety of applications wherein shape memory effect (SME) / superelasticity (SE) and biocompatibility are important. Anisotropy of the shape recovery associated with shape memory effect strongly depends on the type of r 30 minutes in air) Ti-Rich Ni-Ti SMA (Ni51at%Ti) when subjected to cold r...

متن کامل

Comparison of the superelasticity of different nickel–titanium orthodontic archwires and the loss of their properties by heat treatment

The aim of this work is to describe and compare mechanical properties of eight widely used nickel-titanium orthodontic wires under uniform testing conditions and to determine the influence of the heat treatments on the loss of the superelasticity. Ten archwires from two batches from eight different manufacturers were evaluated. A three-point bending test was performed, in accordance with ISO 15...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002