Design of Compact Broadband Microstrip Antenna
نویسندگان
چکیده
The aim of this project is to design and simulate slot based rectangular Microstrip Antenna and to increase the bandwidth and analysis the other antenna parameters like radiation pattern, return loss, gain & Bandwidth and compare the results with the conventional one. The proposed antenna operates in the S-Band (2GHz-4GHz). The simulation is carried out using HFSS-13. In this particular work a Ushape patch is embedded with the rectangular patch which eventually results in band width of 170 MHz, return loss of -34 dB and gain of 6.73 dB thereby enhancement of band width, return loss & gain by 20%, 13%, and 2% respectively with respect to the conventional one.
منابع مشابه
Design and Implementation of a Compact Super-Wideband Printed Antipodal Antenna Using Fractal Elements
A compact printed fractal antipodal bow-tie antenna is designed and implemented to simultaneously cover the operations in the C, X, and Ku-bands. It is demonstrated that by addition of small fractal elements at the sides of hexagonal arms of the bow-tie, a wide operating frequency range of 3.3 to 19.1 GHz can be covered while antenna size is only 30×34×1.2 mm3. In order to match the antenna to ...
متن کاملDevelopment of A Compact and Low Profile Cavity Backed Slot Antenna Using Microstrip Gap Waveguide Technology
Proof of concept of a cavity backed slot antenna based on inverted microstrip gap waveguide (IMGW) technology is presented. Since the antenna is operating based on the first resonating mode of the cavity, it is more compact compared to the ordinary cavity backed slot antennas in which the second cavity mode is used for radiation. Furthermore, the proposed antenna element introduces lower lo...
متن کاملBroadband Stacked Microstrip Patch Antenna for L-Band Operation: FDTD Modeling
This paper presents a novel implementation of an electromagnetically coupled patch antenna using air gap filled substrates to achieve the maximum bandwidth. We also propose an efficient modeling technique using the FDTD method which can substantially reduce the simulation cost for modeling the structure. The simulated results have been compared with measurement to show the broadband behavio...
متن کاملDesign and Miniaturization of a Novel Fractal Microstrip Antenna for UWB Applications
A novel printed octagonal fractal microstrip antenna with semi-elliptical ground plane is presented for ultra wide band applications. The proposed antenna has a compact size of 20×20×1 mm³. The measured result of the antenna exhibits the ultra wide band characteristics from 2/9 to 14/2 GHz. In this paper, reducing antenna’s size by 35%, the same results were achieved, while small dimension frac...
متن کاملA compact stacked Quasi-fractal microstrip antenna for RFID applications
In this paper, we propose a new compact quasi-fractal shaped microstrip antenna that consists of a hexagonal patch as the main radiator and a complementary stacked patch as the parasitic element. The overall surface of the proposed quasi-fractal patch is about 55% lower than the conventional hexagonal patch. Using of stacked technique, the gain reduction of compression technique is almost compe...
متن کاملAntenna Miniaturization Using Fractals (RESEARCH NOTE)
Antenna Miniaturization Using Fractals Richa Garg, AP ECE Deptt., [email protected], J.C.D.C.O.E., Sirsa ABSTRACTThe use of fractal geometry in designing antenna has been a resent topic of interest. Fractal shape has their own unique characteristics that the improved antenna performance can be achieved without degrading the antenna properties. Modern telecommunication system requires antenn...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017