Systematic Extraction Method for the Determination of HBT Temperature-Dependent DC Model Parameters
نویسندگان
چکیده
This paper presents a systematic parameter extraction method for an HBT temperature-dependant equivalent-circuit DC model. A reliable procedure was developed for determining the HBT thermal resistance, requiring only forward Gummel data at different temperatures and collector-emitter bias voltages. The extraction method was applied to predict the DC characteristics of a 2x25 μm emitter-area InGaP/GaAs HBT device.
منابع مشابه
Temperature Dependence of Dc Currents in Hbt
A DC thermal-electrical HBT model is presented in this paper. Only three parameters were needed to simulate completely an HBT with the self-heating effect, and it can be very easily implemented in any CAD softwares which use the SPICE BJT model. Parameter extractions have been carried out on several measured data and goodfittings were obtained over a wide temperature range. This model is ready ...
متن کاملLarge Signal Evaluation of Nonlinear HBT Model
ABSTRACT — The recently developed LS HBT model was evaluated with extensive Power spectrum, Load pull and Inter-modulation investigations. Some changes of the model were made, like improved temperature, leakage resistance and capacitance models. The corresponding changes were implemented in ADS as SDD. Important future of the model is that the model parameters are organized to use directly meas...
متن کاملThermal Analysis of Convective-Radiative Fin with Temperature-Dependent Thermal Conductivity Using Chebychev Spectral Collocation Method
In this paper, the Chebychev spectral collocation method is applied for the thermal analysis of convective-radiative straight fins with the temperature-dependent thermal conductivity. The developed heat transfer model was used to analyse the thermal performance, establish the optimum thermal design parameters, and also, investigate the effects of thermo-geometric parameters and thermal conducti...
متن کاملAnalog/RF Performance of NPN SiGe HBT on Thin Film SOI Over -55 to +125 degC Temperature Range
The research has been carried out to integrate MOSFETs and bipolar transistors on SOI substrate for high performance mixed signal applications [1]. Jin Cai, et al [2] analyzed npn SiGe HBT on SOI substrate. The characteristics of SiGe HBT on SOI over temperature range of 27 to 330 degC are reported in [3]. The performance of SiGe HBT on bulk is reported in extreme environment (-230 to 120 degC)...
متن کاملEvaluation of Eulerian Two-Fluid Numerical Method for the Simulation of Heat Transfer in Fluidized Beds
Accurate modeling of fluidization and heat transfer phenomena in gas-solid fluidized beds is not solely dependent on the particular selected numerical model and involved algorithms. In fact, choosing the right model for each specific operating condition, the correct implementation of each model, and the right choice of parameters and boundary conditions, determine the accuracy of the results i...
متن کامل