The Calibration of a 60’ Cone to Measure Mach Number, Total Pressure and Flow Angles at Supersonic Speeds

نویسنده

  • G. Sawyer
چکیده

SUMMARY The oharaoteristics of a 60' apex angle cone for measuring local Maoh number, total pressure, and flow directions have been determined at Mach numbers of 2.47, 3.25, 3.97 and 4.32 at angles of pitch up to 29'.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology

The present work is an attempt to model, analyze, and control the flow at the base of an abruptly expanded circular duct by using design of experiments (DOE) and response surface methodology (RSM). Tiny-jets in the form of orifice were positioned at an interval of 900, 6.5 mm from the primary axis of the main jet of the nozzle. Experiments were conducted to measure two responses namely, base pr...

متن کامل

Control of Nozzle Flow Using Microjets at Supersonic Mach Regime

This article reports the active control of base flows using the experimental procedure. Active control of base pressure helps in reducing the base drag in aerodynamic devices having suddenly expanded flows. Active control in the form of microjets having 0.5 mm radius placed at forty-five degrees apart is employed to control the base pressure. The Mach numbers of the present analysis are 1.7, 2....

متن کامل

A Low Cost Numerical Simulation of a Supersonic Wind-tunnel Design

In the present paper, a supersonic wind-tunnel is designed to maintain a flow with Mach number of 3 in a 30cm×30cm test section. An in-house CFD code is developed using the Roe scheme to simulate flow-field and detect location of normal shock in the supersonic wind-tunnel. In the Roe scheme, flow conditions at inner and outer sides of cell faces are determined using an upwind biased algorithm. ...

متن کامل

Determination of Shock Standoff Distance for Wedge at Supersonic Flow

An experimental investigation is conducted to calculate the shock standoff (SSO) distance in front of an acute-angled wedge. For this experimentation, simple water flows channel analysis is carried out. The flow velocity is varied from 13.2 cm/s to 25.5 cm/s increasing in steps of 1 cm/s. A velocity of 13.2 cm/s corresponds to Froude number 1.13 and velocity of 25.5 cm/s to Froude number 1.41. ...

متن کامل

Experimental Investigations of Supersonic Flow around a Long Axisymmetric Body

A series of supersonic wind tunnel tests on an ogive-cylinder body were performed to investigate the pressure distribution, the boundary layer profiles, and the flow visualization at various angles of attack. All tests were conducted in the trisonic wind tunnel of the Imam Hossein University. The theoretical shock angle at different model positions compared well with those we obtained via Schi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1962