The Effect of ScanSAR Parameters on Interferogram Quality
نویسندگان
چکیده
1: — When burst-mode data is used for interferometry, the burst cycles must be well-aligned, as well as the normal condition of having the Doppler centroids well-aligned. In this paper, we show the phase error effects of different burst lengths, various burst misalignments, and of receiver noise.
منابع مشابه
ScanSAR Focusing and Interferometry - Geoscience and Remote Sensing, IEEE Transactions on
We discuss an efficient phase preserving technique for ScanSAR focusing, used to obtain images suitable for ScanSAR interferometry. Given two complex focused ScanSAR images of the same area, an interferogram can be generated as for conventional repeat pass SAR interferometry. However, due to the nonstationary azimuth spectrum of ScanSAR images, the coherence of the interferometric pair and the ...
متن کاملScanSAR focusing and interferometry
We discuss an efficient phase preserving technique for ScanSAR focusing, used to obtain images suitable for ScanSAR interferometry. Given two complex focused ScanSAR images of the same area, an interferogram can be generated as for conventional repeat pass SAR interferometry. However, due to the non-stationary azimuth spectrum of ScanSAR images, the coherence of the interferometric pair and the...
متن کاملSAR interferometry using ALOS-2 PALSAR-2 data for the Mw 7.8 Gorkha, Nepal earthquake
The Advanced Land Observing Satellite-2 (ALOS-2, “DAICHI-2”) has been observing Nepal with the Phased Array type L-band Synthetic Aperture Radar-2 (PALSAR-2) in response to an emergency request from Sentinel Asia related to the Mw 7.8 Gorkha earthquake on April 25, 2015. PALSAR-2 successfully detected not only avalanches and local crustal displacements but also continental-scale deformation. Es...
متن کاملTerraSAR-X TOPS, ScanSAR and WideScanSAR interferometric processing
The German TerraSAR-X and TanDEM-X satellites are able to acquire images operationally in ScanSAR and WideScanSAR modes and experimentally in TOPS mode. This paper gives an overview of the interferometric processing steps of burst-mode acquisitions, emphasizing the importance of the co-registration stage. A coregistration approach based on incoherent cross-correlation is presented. Interferomet...
متن کاملBurst-mode and ScanSAR interferometry
ScanSAR interferometry is an attractive option for efficient topographic mapping of large areas and for monitoring of large-scale motions. Only ScanSAR interferometry made it possible to map almost the entire landmass of the earth in the 11-day Shuttle Radar Topography Mission. Also the operational satellites RADARSAT and ENVISAT offer ScanSAR imaging modes and thus allow for repeat-pass ScanSA...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003