Dynamic electrochemical-etching technique for tungsten tips suitable for multi-tip scanning tunneling microscopes
نویسندگان
چکیده
We present a method to prepare tungsten tips for use in multi-tip scanning tunneling microscopes. The motivation behind the development comes from a requirement to make very long and conical-shape tips with controlling the cone angle. The method is based on a combination of a “drop-off” method and dynamic electrochemical etching, in which the tip is continuously and slowly drawn up from the electrolyte during etching. Its reproducibility was confirmed by scanning electron microscopy. Comparison in tip shape between the dynamic and static methods was shown. [DOI: 10.1380/ejssnt.2007.94]
منابع مشابه
Optimization of Electrochemical Etching Parameters in FIM/STM Tungsten Nanotip Fabrication
Field Ion Microscopy (FIM) and Scanning Tunneling Microscopy (STM) have found a wide application in nanotechnology. These microscopes use a metallic nanotip for image acquisition. Resolution of FIM and STM images depends largely on the radius of nanotip apex; the smaller the radius the higher the resolution. In this research, for tungsten nanotip fabrication, electrochemical etching of tungsten...
متن کاملTwo-step controllable electrochemical etching of tungsten scanning probe microscopy tips.
Dynamic electrochemical etching technique is optimized to produce tungsten tips with controllable shape and radius of curvature of less than 10 nm. Nascent features such as "dynamic electrochemical etching" and reverse biasing after "drop-off" are utilized, and "two-step dynamic electrochemical etching" is introduced to produce extremely sharp tips with controllable aspect ratio. Electronic cur...
متن کاملTailoring the Sharpness of Tungsten Nanotips via Laser Irradiation Enhanced Etching in KOH
Controlled modification of appropriate sharpness for nanotips is of paramount importance to develop novel materials and functional devices at a nanometer resolution. Herein, we present a reliable and unique strategy of laser irradiation enhanced physicochemical etching to manufacture super sharp tungsten tips with reproducible shape and dimension as well as high yields (~80%). The corresponding...
متن کاملBlunted Tungsten Tip Cleaning by Nitrogen Gas Etching at Room Temperature without Tip Heating and Cooling
For a long time, the ultra-sharp tips are used for high resolution microscope, such as scanning tunneling microscope (STM), atomic force microscope (ATM), field emission scanning electron microscope (FE-SEM). In addition, helium ion microscope (HIM), which has sub-nanometer imaging resolution, employs the tip as gas field ionization source (GFIS) in recent years. There are a lot of required vit...
متن کاملTip preparation for usage in an ultra-low temperature UHV scanning tunneling microscope
This work deals with the preparation and characterization of tungsten tips for the use in UHV low-temperature scanning tunneling microscopy and spectroscopy (STM and STS, respectively). These specific environments require in situ facilities for tip conditioning, for further sharpening of the tips, as well as for reliable tip characterization. The implemented conditioning methods include direct ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007