The Physics of Weld Bead Defects
نویسنده
چکیده
منابع مشابه
Modeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing
Additive Manufacturing describes the technologies that can produce a physical model out of a computer model with a layer-by-layer production process. Additive Manufacturing technologies, as compared to traditional manufacturing methods, have the high capability of manufacturing the complex components using minimum energy and minimum consumption. These technologies have brought about the possibi...
متن کاملFabrication of synchronized hammer peening with pulsed laser welding and its effect on 6061 aluminum alloy weld
The non-continuous laser beam in pulsed lasers allows the mechanical peening between two consecutive beams on a still hot weld bead. At a very short time (20, 150 and 300 ms) after laser pulse application, mechanical peening was performed on the welding bead. To achieve these short times, the light sensor detects the nth laser pulse and the mechanical arm starts moving. Upon reaching the tip of...
متن کاملB. Genetic Algorithm for Optimization of Process Parameters for Height to Width Ratio and Application of Neural Networks for Prediction of Weld bead geometric parameters for TIG welding process
This paper explains an integrated method of using genetic algorithm on the experimental data for optimizing the process parameters for height to width ratio and use of artificial neural network techniques for predicting the effects on the four weld bead geometric descriptors (front height, front width, back height and back width) by the five controlling weld process variables (welding speed, wi...
متن کاملDefect detection of the weld bead based on electromagnetic sensing
Characterization of flaws of weld bead is imperative for high-quality welding. Methods of weld bead inspection include radiographic, ultrasonic and vision inspection. However, such methods are costly and time consuming. The proposed sensor is light, low-cost and fast. This paper summarizes our work on weld bead monitoring and defect detection using an electromagnetic sensor. Measurements are ac...
متن کاملPrediction of Weld Width of Shielded Metal Arc Weld under Magnetic Field using Artificial Neural Networks
I. Abstract: The prediction of the optimal weld bead width is an important aspect in shielded metal arc welding (SMAW) process as it is related to the strength of the weld. This paper focuses on investigation of the development of the simple and accurate model for prediction of weld bead width of butt joint of SMAW process. Artificial neural networks technique was used to train a program in C++...
متن کامل