RIETVELD based energy-dispersive residual stress evaluation: Analysis of complex stress fields σij(z)
نویسندگان
چکیده
منابع مشابه
Application of Energy-dispersive Diffraction to the Analysis of Highly Inhomogeneous Residual Stress Fields in Thin Film Structures
For residual stress evaluation in complex substrate-coating-systems, energy-dispersive (ED) diffraction with energies up to 100 keV can be applied to analyze the near interface residual stress state in the substrate, because the high energy white beam penetrates the coating completely. By the example of an Al2O3/TiCN on WC coating system we have studied the feasibility for using the coating ref...
متن کاملThe use of high-energy synchrotron diffraction for residual stress analyses
Residual stresses are formed due to inhomogeneous deformation gradients or temperature ®elds during the manufacturing and processing of components. In superposition with load stresses, they severely in ̄uence the strength and failure of components. For the non-destructive evaluation of the residual stresses in crystalline materials, well-developed angle dispersive methods for X-ray residual stre...
متن کاملEvaluation of quenching process on low cycle fatigue life for cylinder head
Due to the complex geometry and thermos-mechanical loading, cylinder heads are the most challenging parts among all parts engines. They must endure cyclic thermal and mechanical loading throughout their lifetime. Cast aluminum alloys are normally quenched after solution treatment process to improve aging responses. Rapid quenching can lead to high residual stress. Residual stress is one of the ...
متن کاملHigh Energy Synchrotron Diffraction
High energy synchrotron diffraction is introduced as a new method for residual stress analysis in the bulk of materials. It is shown that energy dispersive measurements are sufficiently precise so that strains as small 10-4 can be determined reliably. Due to the high intensity and the high parallelism of the high energy synchrotron radiation the sample gauge volume can be reduced to approximate...
متن کاملLeast squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads
In this work, the least squares weighted residual method is used to solve the two-dimensional (2D) elasticity problem of a rectangular plate of in-plane dimensions 2a 2b subjected to parabolic edge tensile loads applied at the two edges x = a. The problem is expressed using Beltrami–Michell stress formulation. Airy’s stress function method is applied to the stress compatibility equation, and th...
متن کامل