Extending the Immediate Buckling Model to Triangular Meshes for Simulating Complex Clothes
نویسندگان
چکیده
The immediate buckling model is an essential element for simulating realistic cloth animations without introducing buckling instability. The original model is restricted to structured regular quad meshes, by which its use is severely limited. This paper extends the immediate buckling model from its original formulation in terms of regular quad meshes to irregular triangular meshes, thereby significantly increasing the applicability of the technique. Using a model that included cloth-specific buckling and anisotropy, we produced realistic animations of quite complex clothes.
منابع مشابه
Pressure-Velocity Coupled Finite Volume Solution of Steady Incompressible Invscid Flow Using Artificial Compressibility Technique
Application of the computer simulation for solving the incompressible flow problems motivates developing efficient and accurate numerical models. The set of Inviscid Incompressible Euler equations can be applied for wide range of engineering applications. For the steady state problems, the equation of continuity can be simultaneously solved with the equations of motion in a coupled manner using...
متن کاملNonlocal Effect on Buckling of Triangular Nano-composite Plates
In the present study, small scale effect on critical buckling loads of triangular nano- composite plates under uniform in-plane compression is studied. Since at nano-scale the structure of the plate is discrete, the size dependent nonlocal elasticity theory is employed to develop an equivalent continuum plate model for this nanostructure incorporating the changes in its mechanical behavior. The...
متن کاملModeling Khowr-e Musa Multi-Branch Estuary Currents due to the Persian Gulf Tides Using NASIR Depth Average Flow Solver
The depth average module of NASIR finite volume solver was applied to study the tide induced currents in Khowr-e-Musa estuary. The model computes water level variation and velocity components in horizontal plane solving depth average continuity and momentum equations considering the hydrostatic pressure distribution. The software takes into account the bed and wall geometric complexities and re...
متن کاملExternal and Internal Incompressible Viscous Flows Computation using Taylor Series Expansion and Least Square based Lattice Boltzmann Method
The lattice Boltzmann method (LBM) has recently become an alternative and promising computational fluid dynamics approach for simulating complex fluid flows. Despite its enormous success in many practical applications, the standard LBM is restricted to the lattice uniformity in the physical space. This is the main drawback of the standard LBM for flow problems with complex geometry. Several app...
متن کاملA Mass Conservative Method for Numerical Modeling of Axisymmetric flow
In this paper, the cell-centered finite volume method (CC-FVM) has been presented to simulate the axisymmetric radial flow toward a pumping well. The model is applied to the unstructured triangular grids which allows to simulate inhomogeneous and complex-shaped domains. Due to the non-orthogonality of the irregular grids, the multipoint flux approximation (MPFA) methods are used to discretize t...
متن کامل