The Quantification of Physiologically Relevant Cross-Shear Wear Phenomena on Orthopaedic Bearing Materials Using the MAX-Shear Wear Testing System

Background: The occurrence of multi-directional sliding motion between total knee replacement bearing surfaces is theorized to be a primary wear and failure mechanism of ultra-high molecular weight poly(ethylene) (UHMWPE). To better quantify the tribologic mechanisms of this cross-shear wear, the MAX-Shear wear-testing system was developed to evaluate candidate biomaterials under controlled conditions of cross-shear wear. Method of approach: A computer controlled traveling x-y stage under a 3 degree-offreedom statically loaded pin is used to implement the complex multi-directional motion pathways observed during TKR wear simulation. A MHz collection of dynamic x-y friction was available on all six environmentally controlled stations. The functionality of this testing platform was proven in a 100,000 cycle, 11.6 MPa, wear test using 15.0 mm diameter polished stainless steel spheres against flat GUR4150 UHMWPE. A five-pointed star wear pattern was used to incorporate the physiologically relevant cross-shear sliding conditions of stop/start, 50 mm /s entraining velocity and five crossing angles of 72°. Using normalized volumetric reconstruction of the resulting surface damage, a direct quantitative relationship between linear and cross-shear surface damage intensity was obtained. Results: Cross-shear surface damage volume loss was found to be 2.94 ± 0.88 times that associated with linear sliding under identical tribologic conditions. SEM analysis of linear wear damage showed consistent fibril orientation along the direction of sliding while cross-shear wear damage showed multi-directional fibril orientations and increased surface roughness. Significant increases in discrete crossing-point friction coefficients were recorded throughout testing. Conclusions: This scientific approach to quantifying the tribologic effects of cross-shear provides fundamental wear mechanism data that are critical in evaluating potential biomaterials for use as in vivo bearings. Relevant multi-axis, cross-shear wear testing is necessary to provide quantifiable measures of complex biomaterials wear phenomena. DOI: 10.1115/1.2000272